Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

daz

April 8th Full Disc

Recommended Posts

Having got my new Esprit finally up and running in time for nearly-full Moon, it seemed a shame not to have a go at imaging it!

Its been a long time since I did any lunar work (get the excuses in early, I say!). I think the focus was a whisker out on the camera, so had to push a bit harder - but it looks OK from a distance if you squint!

100 frames, 600D, Esprit 100D.

Pre-processed in PIPP, Stacked in AS!2, Focus Magic filter in CS5, tweaking of the levels...

 

 

170408MoonMedium.png

  • Like 9

Share this post


Link to post
Share on other sites

Daz, that is a very nice Luna image, focus looks spot on

Share this post


Link to post
Share on other sites

Nice image. Well done! Superb! :) 

Share this post


Link to post
Share on other sites

Yep... Excellent work... 

Well done

 

Greg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By grievous
      Hello! I have a question on how can I mount my camera to my Sky-Watcher Starquest 130P telescope? I’ve watched so many videos about it and there’s so many different answers on what I need to do that. At the moment, I have 2x Barlow lens and a DSLR. I know that a T-ring is also necessary but is there anything more? Any help is highly appreciated, thanks! (I’m really new to telescopes and astrophotography in general so I hope I don’t say anything dumb)
    • By beka
      Hi All,
      Having had to move to an apartment where I could not use my CPC 1100, I decided that I have to see what I could do with my NexStar SLT 102 (alt-az achromatic 102mm f6.47 refractor). Setting up on my narrow balcony was challenging and the altitude bearing was so loose that it almost moved from the weight of the Canon 700D. I could not see M31 in the estimated 3.5 magnitude sky so I did a two star alignment and used the live-view to focus on a bright star. I then took a 15 second exposure after slewing to M31 which allowed me to see that I had it in the field of view. After a few more 15 second exposures and playing with the motion controls I managed to get it centered. The resulting picture is from 39 subs of 30 seconds at ISO 1600, 9 flats. The images were stacked and stretched with Siril and then I played with the curves on Gimp, cropped and scaled. Not too unhappy.
       

    • By astrosathya
      Just thought i'll bring this up as a point of discussion. Today, cooled CMOS Astro Cameras are available in plenty. QHY, ZWO and other variants of the same camera are selling for very reasonable prices. However, there was a point of time when astrophotographers used to cool down their DSLR's as a cheap OSC alternative to CCD cameras. Give a choice, I would've purchased a dedicated CMOS OSC which can cool to 40 C below ambient, but since I had a Canon 500D which I had self modded, I requested a friend Kaustav Chatterjee (an avid model railroader) to cold mod my 500D (he had cold modded his 1000D long back). This newly modded camera has a TEC12703 single peltier and cools to approximately 20 below ambient.What do you guys think?




    • By lux eterna
      Hi all,
      This is 6 hours (30 x 12 min), taken with my modded Nikon D7000 @iso200 and Astronomik 12 nm Ha 2" filter on Meade LX200-ACF with reducer (=1600 mm FL @ F8). Guided with NexGuide on HEQ5 Pro.
      The plan was to do a Ha O3 bicolour on this target, but the O3 may be a future thing due to weather conditions.
      I usually remove the stars during part of my processing workflow and put them back later on, but this time I think the nebulosity and dust came out best without them. I did however try to find out which stars belong to Melotte 15 and include only those, just to portrait the Melotte 15 without anything between it and us, but I could not find that info.
      Processed with DSS, Starnet and PS.
      Ragnar

    • By Dinglem
      I've been off today with a list of jobs to do, which I managed to get completed about an hour ago. So I thought I'd tidy up my scope setup and the wiring to everything. My intention was to replace the small Skywatcher losmandy dovetail bar with a longer Altair-Astro one I have, so I can velcro my Lynx astro dew controller and USB hub underneath out of the way, then get a shorter dovetail bar to put on the top to mount my guidescope. So I removed the tube rings from the little SW dovetail and attempted to fix it to the other dovetail only to discover that none of the holes matched up. So I've put everything back as it was and put it outside as it may stay clear here for a few hours. Anyone know what's the best way for me to resolve this issue.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.