Jump to content

sgl_imaging_challenge_banner_31.thumb.jpg.b7a41d6a0fa4e315f57ea3e240acf140.jpg

Recommended Posts

Hi Guys,

I have SW Equinox 80 pro and it was fitted with focusing motor which I have removed. I can't find itsIMG_3971.JPG locking screw and two small silver screws to tighten the focuser. Do you know where can I buy the locking and small silver screws. Thanks

AJ

Link to post
Share on other sites
1 hour ago, Glimpse111 said:

Hi Guys,

I have SW Equinox 80 pro and it was fitted with focusing motor which I have removed. I can't find its locking screw and two small silver screws to tighten the focuser. Do you know where can I buy the locking and small silver screws. Thanks

AJ

The two missing screws just hold the parts together. M4 thread if I remember correctly.

The central allen grub screw along with those one each side do the tensioning.

Which motor did you have fitted?

 

Edited by iapa
Link to post
Share on other sites
1 hour ago, iapa said:

The two missing screws just hold the parts together. M4 thread if I remember correctly.

The central allen grub screw along with those one each side do the tensioning.

Which motor did you have fitted?

 

It  was RoboFocus. Actually focuser slides down easily so probably because I don't have locking screw!

Link to post
Share on other sites

The center adjustment grub screw seems to be there, it has an Allen wrench connection, The two setting screws on the sides are also there, also grub Allen types.

The two missing stainless steel (silvery) Allen screws... take one out to determine the thread size and length. Any descent hardware shop should have them on stock. If not google it

 

Edited by Waldemar
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By guydive
      Hey all,
      I'm considering the 250PDS. The main use is visual, and the second is EAA (I currently use a zwo183mm). 
      What I'm hesitant about is the primary focus. since It's mostly for visual, I'm wondering on how much back focus it has compared to the standard Skywatcher 10" dobsonians? with the standard dobsonias with the same optics and focuser you already need an extension tube for most eyepieces...
      Also, there's probably a "bigger" obstruction (bigger shadow on primary)? 
    • By AngHor
      I have a SkyWatcher AZ-EQ5 mount. It’s all working fine, except I have an issue with alignment. This applies whether I’m in EQ or Alt-Az mode.
      I set it up using  one or two star align without problems.
      However if I use the handset to GoTo another object, I usually need to do fine tuning adjustments to centre on the new object. But the mount disregards these adjustments, so if I use the GoTo system to centre on a nearby object, or revisit the original object a second time, it’s still off by the same amount.
      How do I tell the mount that I have centred on the new object and that it should now be aligned with that object ? 
      My iOptron MiniTower has a feature that does exactly this – once set up correctly and aligned, for each new object I go to there is an “ALIGN” option, and if I use this it now knows the correct position. Can I do this with SkyWatcher and Synscan ?
      Thanks. Angelo
    • By Planetarian
      Hi, I've got a Skywatcher Heritage 130p reflector, and if i insert anything less than 10mm eyepiece, the image won't get crisp. I guess it's normal, but as I'm very new to astronomy, I'd like to know what the sharpness depends on exactly. 
      Is that the focal length (how fast the telescope is? ) or the size of the mirror and how much light it gathers? Or both affect it the same way?  
      Are things the same with refractors in this regard? Thanks. 
    • By ThadeusB
      I have for sale my Skywatcher Startravel 120. Objective lens 120mm; Focal length . It is in excellent condition, clean and only very minor marks. Clean optics, no fungus. The focusser is the original one and works smoothly; 1.25" and 2" adaptors. With both caps.
      A very good starter scope, or good as a portable scope.
      Included accessories: red dot finder; 90 degree star diagonal; 10mm & 25mm EPs; mobile phone adaptor. All in as new condition.
      Please don't ask me to split this package.
      Price £140.00 no offers.
      It will be very well packed.
      Payment: paypal or bank transfer
      I can deliver by Hermes; I can get a quotation for this if you wish. Or you can make your own courier arrangement, or collect in person.
      Please PM me if you would like more information.









    • By Quentent
      Hi,
       
      So just today i got my new EQ3 mount and tripod delivered.
      Brought it out, balanced it leveled it etc etc.
      So i polar aligned it,  and selected 2 Star Alignment.
      1st star to align to: Betelgeuse.
      As soon as i hit confirm align the motors kick in but as soon as the mount starts to rotate the motors stop and the hand controller resets itself immediatly and starts initializing all over again.
      I discovered that moving Ra on its own works just fine as does moving Dec on its own but whenever i press for example the left and Up arrows at the same time the mount stops and the hand controller resets.
      Could this just be a problem with power draw? The Synpro box takes 12V DC and is supplied by a 12V DC car outlet type power source. However i changed this to a 3 Pin UK 12V 1A DC & AC plug.
       
      Im hoping the power supply is the issue and not something else.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.