Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

wimvb

Does anyone know how to use ZWO ASI120MM with StarsPi guiding app?

Recommended Posts

I am preparing for guiding and have the ST80 with ASI120MM camera. I want to connect this to Lin_guider running on a Raspberry Pi, and use StarsPi as a user interface/client.

At the moment I have connected the camera to the RPi and I can see the connection on the client in my android device. But it says that the camera is off line. That's where I am stuck.

Does anyone know how to continue from here, i.e. get the camera recognised by the app??

Any help appreciated.

Screenshot_2016-11-04-15-34-18.png

Edited by wimvb

Share this post


Link to post
Share on other sites

Well, I guess the absence of a reply is a reply in itself.

Share this post


Link to post
Share on other sites

I wouldn't be too disheartened yet - it's only been 6hrs since your question last night. I know that a few folks here do use RPi and it may take a day or two before they see your question, or before they next visit the forum. :)

Share this post


Link to post
Share on other sites

Six hours and one week to be exact. :wink: But thanks for the encouragement.

I haven't found much in other places either, maybe I'll contact the creator of this app directly. In the mean time I'll use either INDI or PHD.

Edited by wimvb

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By autonm
      I made a new video - which walks through the downloading, installing and setup of AstroBerry (astronomy software running on Raspberry Pi) - and then I connect to an HEQ5 and DSLR camera. Nothing to complicated - but its the basics covered.
      There are a lot of videos out there on using AstroBerry, but not too may walkthroughs on the actual setup. Although Rp and Ab should be simple theres a lot of questions out there just on the setup.
      Hopefully the video gives people confidence on the first steps and is enough to get them going.
      https://youtu.be/Bgn3KioAAJ0
      Many Thanks - clear skies & if the video is helpful please subscribe.
    • By oyabuns
      Hey,
       
      I have a question, did anyone here have luck installing ASCOM alpaca Remote Server on a Raspberry Pi 4?
      Or is it like I suspected as in the below image not possible, unless it's a windows machine?
       

    • By pete_81
      Hi guys,
      With new mount and upgraded scope features, now looking to venture into imaging.
      Before I start, I'm not looking to get feedback on polar alignment, mono guidecam, better imaging cameras, etc; this is more a 'dummies guide' setup discussion! I'm not expecting to get great images at this stage, just more the options available, getting over some issues, so that I can jump outside on a clear night with an ideal, foolproof(!), setup for either imaging or visual as time would permit and what may work best for me. As you may guess from the topic name, I'm a mac user (Macbook Pro) and would rather keep to this if possible (whilst I do have Windows (and Ubuntu) via parallels, I'd rather not use these).
      I've got a setup which has worked well for visual, and obviously want to have a couple of 'staple' setups that I can use depending on expectations of night observing or imaging. So far, the best one for me has been the Skywatcher Wifi Synscan controller, which has worked a treat with my Android phone - I use the Synscan app to complete alignment and GOTO stars/planets/DSO etc, or Stellarium_plus after completing alignment. This removes the need for the Synscan Handset and any USB cables to the mount altogether. But I don't know if this will work for guiding.
      That then brings me to my issue on mac - connecting USB(A) between Macbook and Handset, I've attempted to control the mount through Stellarium. Trying each of the available connections (/dev/tty.usbsetial-1420, /dev/cu.usbsetial-1420, and just for sake of it, the /dev/tty.Bluetooth-Incoming-Port and /dev/cu.Bluetooth-Incoming-Port) in the dropdown menu under DeviceSettings/SerialPort, I cannot get the mount to connect (well, more like selecting the telescope and clicking the "Start" on the TelescopeControl just results in the spinning icon and I have to Force-Quit Stellarium and start again with the same result each time. Annoyingly (for fellow mac users!), Parallels/Windows/Stellarium connects and controls the mount fine! As the mount is the newer "pro" type, I also have a USB connection directly under the hand-controller RJ45 and AutoGuider ST4 sockets, but using this still results in the same issue. Another issue I have seen is that when I unplug the USB from the computer when connected to the handset, the date on the controller jumps significantly - for example, last night at ~23:30, I was transported through the local wormhole galaxy to Jan 2048 according to Synscan! Obviously unplugging isn't going to happen during a genuine session, but just wondering if this is a possible issue somewhere?!
      Any other mac users connecting USB directly to the SW 'Pro' mounts?
      Software wise, would folks generally suggest steering away from Stellarium towards KStars or SkySafari(Plus) for controlling the mount?
      Can the Wifi dongle be used for controlling mount from computer (any OS) or do I need to go USB either to handset or directly to mount?
      Is there an issue in using Mac USB to the telescope compared to 'straight' Windows (i.e. PC/laptop with Windows instead of virtual)?
      Anyway, back to topic... I've a Nikon DSLR to use for primary camera at this stage, which would be triggered independently from guiding software. PHD2 is my hopeful choice of guiding software (is EKOS with KStars similar?), with T7C guide-camera on 240mm f/4 guidescope, and at this stage, I can confirm PHD2 at least connects to the camera on OS-X. There is an ST4 port on the camera, but having read several topics, I think I want to pulse-guide directly - is this correct or is ST4 best for this setup? This sorta comes back to software and connections - my understanding is one of the following cable setups for guiding (as a minimum) :
      Guiding-camera => USB(A) => Macbook => PHD2 => USB(A) => SynscanHandset => AZEQ6
      Guiding-camera => USB(A) => Macbook => PHD2 => USB(A) => AZEQ6
      Guiding-camera => USB(A) => Macbook => PHD2 => Wifi => SynscaWifi Adapter on AZEQ6
      [using ST4: ST4_on_AZEQ6 => Guiding-camera => USB(A) => Macbook => PHD2] (no additional connections needed if ST4 is used)
      Additionally, I'd like to use an observatory package, say Stellarium/KStars/SkySafari, to select objects and drive the mount, then use guiding software to keep good 'tracking'.
      Where in this train does EQMac fit in, or when is it used?
      What about the 2019 addition to EQMod (ASCOM Alpaca)? Can this be used or is it already in other packages?!
      For Windows users, how does EQMod fit in (if I go down route of getting Windows laptop for controlling things, is the setup similar to above?
      There may be bits in the above that repeat, and for that, I'm sorry, just want to get across the message that I'm new to the guiding but haven't quite settled down into the software/hardware I'm expecting to use for 'goto' and 'guiding'
      TLDR:
      For a mac user, what setup and software are folks using for guiding and observatory softwares for the newer USB-on-mount 'AZEQ6/EQ6-R Pro' mounts from SW?
    • By astrosathya
      Recently I had belt modded my HEQ5-PRO and last night i gave it a full run and i was absolutely stunned to say the least about the guiding results I achieved. I was left wondering if its even too good to be true! 
      Below are Before and After images of guiding.


    • By aditya10
      Hello!
      This is my first post on stargazer’s lounge, so forgive me if this is the wrong place to ask. 
      I have a SkyWatcher AZ-GTi mount (with a firmware update + eq wedge so that it can run in eq mode). I also have a Raspberry Pi 4 with INDI, KStars, and Ekos tools. I don’t have a guidescope (and my budget is extremely limited), so I was wondering if there was a way to polar align my DSLR using just the software running on the Raspberry Pi. 
      I’m also competent in Python, if that could be useful for anything. 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.