Recently Browsing 0 members
No registered users viewing this page.
yesterday evening, I started observing the moon and sketching crater Copernicus even 15min before sunset. The contrast on the moon wasn't perfect yet, but on the other hand the contrast on the sketching paper was better - no need for LED. Copernicus with its prominent ray system is wonderfully appearing on the full moon but this time I just concentrated on the 96km crater itself:
Telescope: Celestron NexStar 127SLT
Eyepiece: ExploreScientific 6.7mm/82°
Date & TIme: June 12th, 2019 / 2130-2230 CEST
Location: home terrace, Dusseldorf region, Germany
Technique: Koh-i-Noor chalk and charcoal pens on black sketching paper
Size: appr. 30x30cm
Looking in my filed skeches, I figured out that I have visited Copernicus five years ago. Here's a comparison of the two sketches showing some changes in technique:
since i started work on my observatory there hasn't been much time for AP, but since lunar photography is done in minutes i had a go yesterday.
SW AZGTI with the Skymax127 and Sony A6300 and Baader Neodymium Moon & skyglow filter.
100 frames taken and 50% used to stack in autostackerd.
c925 and 294mc pro bin 1 with ir/uv cut filter. 2 panel mosaic best 25% of 1,000 . Had to convert to jpeg as i keep getting an error 200 when trying to upload a larger file. ( 50+ mb ) clicky for full rez.
and a few with the 385c camera with neodymium filter and mostly barlowed.
Posting in this forum after too long!
One of the first attempts at taking photos of the moon.
All photos taken using skywatcher 90mm refractor with eq2 mount, Nikon DSLR and 2x Barlow here and there.
Basic editing in cellphone.
Thank you! Suggestions highly appreciated!
Another clear evening on Saturday near Preston, Lancashire. Although, it was pretty cold.
7 shots into this one (plus one dark), stacked within Photoshop and some level adjustments to brighten it up a little.
Camera: Canon 600D
Scope: Skywatcher 127 w/AZ-GTI mount
Shutter speed: 1/400s