Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

sgl_imaging_challenge_banner_globular_clusters_winners.thumb.jpg.13b743f39f721323cb5d76f07724c489.jpg

Recommended Posts

Nice to have a few clear nights for a change!

I finally managed to include some darks and flats :happy11:. These are different versions of a set of 4 X 256s sub-frames. I think I prefer the less processed one (a) - the stars are less bloated.

Any critique/advice welcomed!

 

 

Borg 55FL f/3.6; Atik 490 EX colour

NGC7000 a.jpg

NGC7000 b.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Agreed, first one has nicer stars. It is still fully black clipped though (you have jet black background in places) and the stars could be toned down further to move the attention to the nebula more, but the colour balance is better and less green tinted.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By EyeGuy
      My effort from Derry last night - once I remembered to remove the cover from the field flattener. Doh.
      I know the North America Nebula is done to death, but this is my first time imaging it, and also my first time trying the Triad filter with my Nikon. I'm in the middle of the city but I was able to take 5 min subs! I processed in PixInsight, but didn't even have to do background extraction. I used photometric colour calibration to restore natural colour and then just did a bit of mild tinkering. I'm impressed by the Triad filter on my first try.
      Comments welcome - maybe I should try a star mask and try to bring out star colours?
      Barry
       
      22 X 5 min subs - 1hr 50min integration
      PixInsight for calibration / registration / processing
      Mount - Vixen AXD2
      Scope - TEC 180FL
      Camera - Nikon D750

    • By StaceStar
      Hi all
      I'm still transitioning from an unmodified Canon 200D to an Altair Astro 183C pro. I think this might be my best image yet, and the first time I have tried a mosaic.
       
      Its made of two panels, each panel has 20x120s + 30x60s. Stacked and stitched in Astro Pixel Processor and edited in PS CC 2018. I'm pretty pleased!
       
      Scope is a SW ED80 DS pro (reduced to 480mm, f/6) on a HEQ5 pro. Guided with a QHY5L-II in my finderscope.

    • By steppenwolf
      I've spent the day at the keyboard documenting some image processing techniques and as the skies have been so poor, I've had to use some old data for the screen shots but this one worked out OK with the new work-flow.
      A Wall of Ionization

      NGC 7000, the North America Nebula, is a very popular deep sky imaging object and its rich Ha emission content makes it particularly appealing for RGB imaging. However, I like to capture this region of the Milky Way in Cygnus using narrowband filters to really bring out the detail in ‘The Wall’.
      As well as the predominant Hydrogen Alpha (Ha), this object is also quite rich in doubly ionised Oxygen (OIII) emissions. The position of OIII emissions in the light spectrum, right on the cusp between green and blue, allows a full RGB colour image to be produced from just two sets of filter data by using the OIII data for both the green and blue channels and the Ha data for the red channel.
      Image Stats
      Mount: Mesu 200
      Telescope: William optics FLT98
      Reducer: William Optics FR IV
      Camera: QSI 683 WSG-8
      Filters: Baader 8nm Ha and 8.5mm OIII
      Subframes: 19 x 900 sec OIII, 19 x 600 sec Ha
      Control: CCD Commander
      Capture: MaxIM DL
      Post-Processing: MaxIM DL and PS3

    • By gnomus
      The summer has proven challenging weather-wise here in the UK.  The original plan was for 5 hours each of SII, Ha and OIII on this object.  I got pretty close to completion last night before the clouds rolled in.  I have decided to call it therefore, even though I am still 4 subs short of target.  This is my Esprit 120, with QSI 690 atop a Mesu 200 in my home observatory.   
      Data captured between 27 May and 19 August 2017 and consists of:
      Ha: 18x1200" OIII: 13x1200" SII: 13x1200" For a total of 14.7 hours
      Data was then brutalised using PI and PS.
       
    • By Aenima
      A h-alpha shot of the Wall section of NGC7000 aka north america nebula.
       
      ED80 - ATK16HR - Ha clip filter - EQ6 - finderguider 9x50mm 
       
      PhD2 - photoshop - DSS. 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.