Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

stargazine_ep28_banner.thumb.jpg.b94278254f44dd38f3f7ee896fe45525.jpg

Sign in to follow this  
Inimbrium

Wanted CG5/EQ5 tripod (without the mount)

Recommended Posts

Hi all

I'm looking to build a 10" budget equatorial telescope. I know it sounds like a contradiction in terms, but I've almost managed it. All I need now is the tripod part of the mount as I have the actual equatorial mount minus the tripod.

I also know a CG5/EQ5 is a bit small for a 10", but I have my ways to lighten it up.

Thank you.

PS. I'm also looking for counterwight bar, counterweights (13kg telescope, but will reduce to improve tracking), motor drive(s), and polar scope. Ta.

Edited by Inimbrium

Share this post


Link to post
Share on other sites

Sorry to hear your predicament. Until very recently I was selling my old CG-5 go to, tripod and host of accessories but decided to give the gear one more chance. Hope you find what you need.

Cheers,

Steve

Share this post


Link to post
Share on other sites
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Brownthunder93
      Anyone have any idea where I can get a replacement counterweight bar/shaft for my EQ5 mount? 
    • By DaveSw
      Is anyone here controlling a Vixen SP2 (SB One) with an external computer for GoTo, etc. (for AP use)?  Is it even possible?  I have been unable to find any references to it. I see Vixen mounts suggested as fine, but expensive mounts and references to SB Ten providing GoTo capabilities but nothing to suggest it’s doable with the “simpler” version. 

      I’m  looking for my first solid mount to do photography with a 70-80mm refractor. Starting with a mirrorless APC camera and eventually a cooled mono camera. I’ve been considering mounts I can move in and outdoors relatively easily. This mount and the HEQ-5 are the two I’m looking at most seriously at this time. The local market (western Canada) for used mounts seems to have dried up during recent times, so new is what I’m looking at. (Vixen because of their “it’s already fiddled and should just work” reputation and the HEQ-5 because it’s well known with fixes and mods well defined. (It’s also more affordable by a fair margin here.)
    • By AstroRuz
      For sale is my beloved but now superfluous to requirements HEQ5 Pro for £650
      It's in a used condition as you would imagine. I've had it for about 4 years and found great success with this mount. Ideal for those beginning astrophotography and also good for visual users.
      I'm calling it "deluxe" due to the upgrades I've had done.
      - It's belt modified
      - It's had brand new bearings and grease
      - The backlash has been expertly setup 
      - It has the latest polar scope
      - The power port has been replaced with an aviation style port which is a lot more secure
      It'll come with the hand controller and at least 1 counterweight (if I can find the second it'll come with both). The polar scope cover has been lost. The counterweight is rusty as always. There is some marring on the counterweight bar housing as shown in the photos.
      It also will come with the modified power cable required also.
      Note: the power LED sometimes doesn't illuminate but the mount is still powered (please see the photo with the hand controller).
      Collection or local delivery within Northampton







    • By Ade Turner
      I’ve been using my 8’ Edge HD on an Evolution mount for a couple of years now and I added a wedge to it a few months back. Using SkyPortal with StarSense I’ve never really had any major issues getting it aligned. 
       
      Last night I was setting up to photograph Mars and went through my normal procedure. StarSense took its images but, after confirming success with the third plate, instead of just winding up a bit and parking it proceeded to pitch the ota towards the north well below the horizon.
       
      Fortunately nothing snagged. I skipped the ASPA and instructed it to goto Mars and was surprised to find it was spot on (better than usual actually).
       
      Anyone any ideas why it took that nose dive? Thanks.
       

       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.