Advice about secondary mirror

[REG78]

Hi I have a skywatcher reflector 130 I have just noticed a hole wer a screw should fit into th secondary itself while I was collimating has any of th 3 Allen screws to go into this hole any advice wud b great

[rwilkey]

Hi there, that seems strange, if you have just bought it, I would refer back to the supplier and see if the can advise or replace it.

[REG78]

I got th scope brand new in December any1 else seen wat I'm talkn about any1 with sw 130

[Cornelius Varley]

Can you take some photos ?

[REG78]

[REG78]

Thts th screw hole on th secondary  

[Dave In Vermont]

I can't see from the photo. So I'll ask: Is there a central-bolt going into the center of the secondary-mirror cell? And are there 3 small-bolts going onto the edges of the secondary-mirror cell? That's a total of 4 bolts  in a circular pattern. 3 small and one larger.

If there are 4 in it - you're good.

Dave

[REG78]

Yea everything as u said Dave but thers as screw hole ther aswel as if to hold th mirror in place with screw as if 1 of th 3 bolts shud fit into it