cloudbuster Posted February 24, 2016 Share Posted February 24, 2016 good morning all....i do hope that you had a good nights imaging last night. my night was ruined with problem after problem. i eventually got things running, imaging ic410 tadpoles, but during the 5th 20min sub, my mounts handset display read 'no link to M.C. stand alone mode'. the guiding went hay wire and i had to stop there and then. please can anyone tell me what has gone wrong, and how i can fix it? hoping someone can help. cheers bob Link to comment Share on other sites More sharing options...
Cornelius Varley Posted February 24, 2016 Share Posted February 24, 2016 This could be due to a broken wire in the handset-mount cable or socket on the mount. The cable is a standard cat5 network cable so you should be able to confirm a faulty cable by swapping it for a network cable. Link to comment Share on other sites More sharing options...
cloudbuster Posted February 24, 2016 Author Share Posted February 24, 2016 thanks peter....will look into this asap. cheers bob Link to comment Share on other sites More sharing options...
carastro Posted February 24, 2016 Share Posted February 24, 2016 It was pretty cold last night, I have heard of handset's stopping working when they are cold. Alternative is to use EQmod. However hope you get it foxed soon. Carole Link to comment Share on other sites More sharing options...
swag72 Posted February 24, 2016 Share Posted February 24, 2016 You may be better off using EQMOD Bob, as I'm sure that I've read on many occasions that the connection between the handset and PC to run the mount is far from ideal. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.