Jump to content

sgl_imaging_challenge_banner_31.thumb.jpg.b7a41d6a0fa4e315f57ea3e240acf140.jpg

Recommended Posts

For sale, this as new red dual speed Moonlite focuser. Bought recently in the FLO overstock sale for £260 plus shipping. Decided I didn't actually need it after all! This one has the SW flange for the ED80/100/120.

Looking for offers around £260 including shipping. PM me if interested. I'll take it to SGL11 too if it hasn't sold by then, £250 if collected from there.

image.jpeg

image.jpeg

image.jpeg

Link to post
Share on other sites
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By ThadeusB
      I have for sale my Skywatcher Startravel 120. Objective lens 120mm; Focal length . It is in excellent condition, clean and only very minor marks. Clean optics, no fungus. The focusser is the original one and works smoothly; 1.25" and 2" adaptors. With both caps.
      A very good starter scope, or good as a portable scope.
      Included accessories: red dot finder; 90 degree star diagonal; 10mm & 25mm EPs; mobile phone adaptor. All in as new condition.
      Please don't ask me to split this package.
      Price £140.00 no offers.
      It will be very well packed.
      Payment: paypal or bank transfer
      I can deliver by Hermes; I can get a quotation for this if you wish. Or you can make your own courier arrangement, or collect in person.
      Please PM me if you would like more information.









    • By Ade Turner
      Now I’ve managed to sort out control of my EQ6-R Pro using Stellarium via EQASCOM, I’m working my way through the other equipment I want to control from my Windows 7 laptop.
      I’m stuck trying to get my Celestron focuser to be recognised. This is what I’ve done so far:
      Downloaded the Celestron Focuser Utility Program (.exe file) from here: https://www.celestron.com/pages/manuals-software Also downloaded the December 2019 USB ASCOM driver set up from above. I ran the ASCOM driver set up and restarted the laptop. Connected focuser direct to laptop via USB. The focuser’s power light shows red and in Windows control panel it recognises the device as ‘Celestron Focuser’ but indicates no driver present. Ran the Celestron focuser utility program hoping it would connect and install the right driver so I could calibrate, but it can’t detect the focuser at all. Finally, ran APT to see if I could connect by choosing the ASCOM driver under ‘Gear’ but this doesn’t work either. Stuck now. I’m guessing I need to somehow ‘tell’ Windows where the driver is...? 
      Any thoughts? Thanks everyone
      🙂
       
      EDIT: I have previously had this focuser working correctly both with StarSense handset and via ASCOM (Celestron unified driver) through the aux on my old Evolution mount. However, now I’ve changed to a Sky-Watcher mount, I need it to function direct through USB.
    • By starman-scott
      Hi, I have changed the focuser on my newtonian but its too short.
      I realise that I can just add an extension tube to it but I’m not sure if that is the best solution.
      I also seem to have have a stray light problem (I’m getting a hazy image on a 5mm eyepiece).
      A third problem is that I find it quite cumbersome that the focuser has to stick out so far (155mm+eyepiece).
      I wonder if I might solve the stay light problem by extending the main telescope tube instead of the focuser and therefore getting the eyepiece closer to the secondary. And also maintain more precision in the focuser by not extending it.
      As it stands the focuser would have to come out 265mm from the centre of the secondary mirror in order to focus. The secondary is 50mm wide. From primary to secondary is 950mm approx.. The primary is 200mm Thanks for reading. Any advice will be much appreciated.
       
    • By wavydavy
      Originally brought for my C11 HD Edge, which its made for, but if used with filter wheel, OAG, and 0.7 focal reducer the spacing is to far out, hence the reluctant sale of this A+ Condition, unused (other than to see if it worked) focuser. The price includes special delivery. Bank transfer, paypal is ok, or cash/collect...ect... The price is £200. This would be great for planetary imaging, imaging without using an OAG, bringing the travel closer. Thanks for looking.




    • By A_D05
      So I am fairly new to the hobby, what I mean is I have a Celestron Astromaster 114 right now but its hard to use because of the non computerized equatorial mount as well as the red dot sight is bad. I am mainly interested in looking at DSO’s because they seem very interesting. My question is should i get a refractor or sct for observing dso’s and sometimes planets? I want a computerized one with tracking so I don’t have to take a long time finding nebulae and galaxies. Also, is there a certain type of filter to see color on nebula when not using eaa and just viewing with your eyes? I am looking to spend between $600-900
      thanks, 
      drew
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.