Jump to content

Stargazers Lounge Uses Cookies

Like most websites, SGL uses cookies in order to deliver a secure, personalised service, to provide social media functions and to analyse our traffic. Continued use of SGL indicates your acceptance of our cookie policy.

sgl_imaging_challenge_banner_beauty_night_skies.thumb.jpg.2711ade15e31d01524e7dc52d15c4217.jpg

davedownsouth

Pacman in Narrow Band

Recommended Posts

Thought I would share my first attempt at the Pacman Nebula (NGC281) using some Badder Narrow band filters in my Atik One 6.0 / Esprit 120ED.  Over two nights, I first took 12 x 10 minutes guided shots at 1x1 binned with both the Ha and OIII filter (i.e., 4 hours total exposure) and put them together using PI with Ha mapped to red and OIII to both Green and Blue.  This gave this image:-

Pacman%20bicolour%20final_zpshe0hblm8.jp

On the following night I then took 12 x 10 minutes guided shots at 1x1 binned with the SII filter.  I then put all the shots together using PI, this time with SII to red, Ha to green and OIII to blue (6 hours total exposure).  This gave this image:-

Pacman%20tricolour%20final_zpscuru0yqj.j

I think for the bicolour one, I have over stretched it a bit, which I do not like, and although I prefer the tricolour, I can not help but think that it should be red rather than green, which is of course what is going to happen if Ha is mapped to green rather than red?? 

All comments, particuarly critical ones on how I could improve things (I have a very think skin) welcomed.

DDS :)

  • Like 3

Share this post


Link to post
Share on other sites

Great stuff Dave,

the Hubble version at the bottom just needs some further processing steps to achieve the Hubble colours, you need to turn those greens to golds and cyans. If you are using Pixinsight then give it a dose of SCNR set to green and then just tweak the saturation after. Or in photoshop you can use selective colour to do the same thing. Bob Franke has a good tutorial here - http://bf-astro.com/hubblep.htm

Edited by johnrt
  • Like 1

Share this post


Link to post
Share on other sites

Great stuff Dave,

the Hubble version at the bottom just needs some further processing steps to achieve the Hubble colours, you need to turn those greens to golds and cyans. If you are using Pixinsight then give it a dose of SCNR set to green and then just tweak the saturation after. Or in photoshop you can use selective colour to do the same thing. Bob Franke has a good tutorial here - http://bf-astro.com/hubblep.htm

Hi John, massive thanks for the tip on the SCNR, applied it and this is what I got; much more like what I was hoping for  :)

Pacman%20tricolour%20final%20scnr%20appl

  • Like 1

Share this post


Link to post
Share on other sites

hope you dont mind did the same thing with photo shop plugin HLVG - strong then medium 

post-12098-0-17457300-1442065778_thumb.j

post-12098-0-99926800-1442065851_thumb.j

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By knobby
      Slowly dabbling with narrow band and the processing that is becoming more like art than science 🙂
      I really am enjoying it though, Imaged this in my red zone back garden last night, it's 10 x  300 secs each of Ha Oiii and Sii ( no darks as they looked weird )
      Thanks for looking / feedback.
      DSS - Photoshop levels / curves - gradient xterminator - photoshop channel combine as per @swag72 tutorial - photoshop levels to balance colours to my taste - slight noise and star size reduction  (Noels tools)

    • By Xiga
      Hi guys
      First things first, apologies for posting this one out of season. A combination of no astro dark, crappy weather, and being busy at work has meant that there's no imaging getting done at all these days. So, i've had to turn to old data to re-process, and this data set was an obvious candidate as i was never happy with how it came out originally. And looking back on it now with fresh eyes, boy did it need it! 
      Nikon D5300, SW 80ED, HEQ5-Pro. 
      3 x 1200s, 2 x 1380s, and 4 x 1500s of Ha
      9 x 1200s of Oiii. 
      11 x 480s with an IDAS-D1, for RGB stars only
      7 Hrs 54 Mins in Total. 

      Stacked in APP and processed in PS. 
      Combined as SHO (using a 70/30 blend of Ha/Oiii for the Sii). 
      The main differences this time were, using Starnet++ to create the starless versions, using more Ha in the synthesized Sii (70% instead of 50% last time), but mostly the improvement has come from toning down the stretch a lot (ok, a heck of a lot!) before making the colour map for the tone-mapping. From then on it was immediately apparent that i'd made a massive boo-boo first time round 🙈
      I've included a 1080p rotated crop too, as i quite liked the framing.
      Feels like ages since i last did any NB imaging. I almost forgot how much i enjoy it! 🙂 


       
       
      And rather embarrassingly, here's the original. Try not to laugh too hard! 😂 😂 😂

    • By eshy76
      Hi everyone,
      This has been on my hard drive for some months, so nice to have finally got round to processing it! Shot over several nights in January in my back garden.
      NGC 281, also known casually as the Pacman Nebula, is a bright emission nebula and part of an H II region in the northern constellation of Cassiopeia and is part of the Milky Way's Perseus Spiral Arm. It lies about 9,500 light years from us and is 48 light years across.
      As the final version, I've gone for a crop, which I think holds up well, though I'll include the wider fov version in the next post.
      I used a more natural colour blend for this image:
      R = 76%*Ha + 24%*SII
      G = 100%*OIII
      B = 85%*OIII + 15%*Ha
      For some reason, I was not expecting much from this image, but the result looks like it will be one of my favourites...the narrowband data was really good!
      Captured using APT, stacked using APP and processed in Pixinsight.
      5.4 hours integration time.
      Link to full details and higher res version.
      Thanks for looking!

    • By Xiga
      Hi guys
      So we had a completely clear night last Thursday and, as luck would have it, i was actually off work all week, so i was able to take full advantage. Well, mostly, as you'll soon find out. 
      As it turned out this was a night that almost went completely awry. The first thing that i messed up was i forgot the external battery that keeps the D5300 powered all night. I only noticed this after driving the 45 min trip back to the family home where i do my imaging. Doh! Luckily though, i dipped into my big bag of astro stuff and found the 2 old camera batteries and charger that i used to use. By my reckoning it was last December when i last used them, so i was amazed to find they still had quite a bit of charge in them! So i was able to charge one while i used the other. Unfortunately though it meant i had to keep going out to the scope every 2-3 hrs to change battery, but tbh i was just relieved that i didn't have to drive home and lose another 90 mins of dark sky time. 
      The next thing to grumble was the guider. For some bizarre reason, i could not see Polaris in the Fov in Sharpcap. I could barely see anything at all tbh so even though Sharpcap told me it was able to platesolve i was very dubious. And then when i came to do the Sharpcap PA routine, the adjustments were jumping around all over the place. It took me about 25 mins to PA instead of the usual 5, and i really thought the guiding was going to be a nightmare, but what do you know, it turned out to be actually really good. It even dipped below 0.5" at times. Go figure!
      Due to the floodlights of the sports facility (which is rather conveniently only about 100 yards away from the house) i was forced to start with Ha subs, then once they were turned off at 10pm, i switched to Oiii, as i knew the moon was coming up around 00:30 so i needed to take advantage of the darkest part of the night. I figured i'd go for about 3 hrs of Oiii, knowing that with the final filter change back to Ha again, i should end up with about 4-5 hrs of Ha in total. Well, after doing the last filter change and going back in to grab a nap for a couple of hrs, when i woke up and checked Team Viewer i noticed that the sequence had unexpectedly ended. Went out and saw that the 7 Ahr LifePo4 battery i use for the mount had died. I also noticed that the lens of the Finder-Guider had completely dewed up. As it turned out, the dew strip for it had failed so i've had to order a new one. I've also ordered a PSU to power the HEQ5-Pro from the mains, so fingers crossed i shouldn't have to worry about mount power over the winter now. All in all this was a bit of a pain of a night, as i normally only shoot 1 filter per night. Sometimes in the longer winter nights i might do 2, but i've never done 3 before. It's a real hassle too, as i need to shoot flats, change filter, re-frame and re-focus. All of which can take upwards of 30 mins. Hmmphh. 
      So long story short i didn't end up with as much Ha as i wanted for this, which has meant it's been trickier to process than i would have liked. I should probably have just waited and done another night of Ha, but with all the hassle i have to go through to get any imaging done these days (drive, setup, tear down and pack away, drive home, sleep deprivation) i will always just try and use what i've got and move on to the next target. The Mean ADU level was quite low on this one, probably because the target is quite small and only occupies the centre of the frame. I've probably been lucky up to now, by mostly shooting larger targets, so i was disappointed with the low ADU levels, which are scraping the bottom of the barrel for me in terms of getting away from the noise floor. So i upped my exposures a bit, pushing as high as 25 mins, which is the nighest i've ever gone with the HEQ5-Pro. It seemed to still handle it quite well, although it didn't improve the Mean ADU level anywhere near enough. 
      Full capture details:
      3 x 1200s, 2 x 1380s, and 4 x 1500s of Ha
      9 x 1200s of Oiii. 
      11 x 480s of RGB (with an IDAS-D1). Used for the stars and sky background only. 
      7 Hrs 54 Mins in Total. 
      All shot with a Nikon D5300, SW 80ED, and an HEQ5-Pro. 
      The RGB data was shot over a year ago from inner city Belfast (Red Zone) while i was testing out the new Rowan belt mod. It was just a test shot to check the guiding, so the 8 min subs were far, far too long in reality, hence a lot of the medium and bright stars are clipped. But i have to say, the IDAS-D1 together with APP did a nice job of cleaning it right up and making it at least useable (well, by my standards at least!). 
      So on to processing. I've been playing with this for several nights now, and i just can't look at it anymore! i think this is the best i can manage with the limited data i have. It's been enjoyable and yet frustrating at the same time, lol. As usual, this has been stacked in APP and processed in PS. I used the tone-mapping method of processing, and created a synthesised Sii from a 50/50 blend of the Ha and Oiii. I then combined them in the classic Hubble Palette SHO. Obviously, not having any real Sii means i can never get the full range of tonal variations throughout. I'm also not completely happy with the colours if i'm being honest (especially the blue). That was the part i struggled with the most on this one. 
      I've also attached below a quick and dirty HaRGB version, which took me all of about 30 mins to process (in total contrast to the SHO version, which i won't say how long it took!). 
      As always, constructive criticism welcomed with open arms! 
      Ok time for me to stop rambling on now ? 
      Edit - Forgot to say, I resized the sSHO version down to 75% of the original (it's not worthy of 100% viewing).


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.