scottphillips Posted April 23, 2015 Share Posted April 23, 2015 Shot my first M3 last night and got around 20 light frames of 120 seconds and also took around 20 darks and 50 flatsLoad them all into DSS and when I click on the light frames that's all that comes up is 2 or 3 small stars from the original image and no cluster, where as when I view each light frame straight from my DSLR it clearly shows the clusterI went on with the processing anyway and bumped up the star detection and the final image said it could only stack 1 frame due to low number of stars detected Any help please guys ? Link to comment Share on other sites More sharing options...
wxsatuser Posted April 24, 2015 Share Posted April 24, 2015 When you say you bumped up the star detection I assume that you lowered the threshold.The default is 10% so make sure you go lower than 10%.If you do have enough round stars it should detect them. Link to comment Share on other sites More sharing options...
Stargazer33 Posted April 26, 2015 Share Posted April 26, 2015 Can you post one of your lights so that we can see what you have to work with? If there is too much trailing then DSS won't recognise them as stars. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.