Jump to content

 

1825338873_SNRPN2021banner.jpg.68bf12c7791f26559c66cf7bce79fe3d.jpg

 

Logitech controller


Recommended Posts

Good evening,

I was after some help regarding the repair of a Logitech controller. I recently purchased a Logitech dual controller to control my HEQ5 through eqmod. Being the muppet that I am as I was unwrapping it I snipped straight through the USB cable. Fortunately it was only about an inch from the USB plug. I am thinking that this is repairable but was wondering what was the best way to go about it. Do I join the cables back together or open up the socket and re-solder the controller to the  USB plug or open up the controller and attach a new USB cable to the controller?

Many thanks

Marc

Link to comment
Share on other sites

Depends on your abilities. I doubt you will be successful opening up the socket as it will be a moulded unit. Best option would be to replace the cable provided you can open up the controller as some modern kit appears to be either glued together or held together with clips which easily break off. The easiest would be to joint the cable - solder the wires, insulate the bare wires with tape then cover with heat shrink tubing.

Link to comment
Share on other sites

Thanks for taking the time to respond. I actually started before you replied so I did cut the USB plug open removed it and managed to solder it all back it, taped it up, functionally tested and it's all working. Pheewww.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.