LINX 7 CONTROL OF HEQ5PRO

[technomate]

Being a cold blooded so and so, I have been trying to get complete wireless control of my HEQ5PRO, apart from mains supply that is. At long last I seem to be getting somewhere using the following

1) HEQ5PRO

2) 7 CHANNEL USB HUB (POWERED  WITH 5V FROM HEQ5 12V SUPPLY)

3)QHY5 CAMERA

4)PENTAX K5 DSLR

5)LINX 7 INCH TABLET WITH WINDOWS 8.1

6) NORMAL LAPTOP WITH WINDOWS 7

The software I am using is as follows

C2A,PHD Guiding, PK-TETHER and to talk to the LINX 7 from my kitchen I am using TEAM VIEWER 9.

I  am controlling the LINX 7 via my NTL broadband setup and up to now it all seems to operate good, I have still to actually setup the eqmod platform for guiding, but all the software seems to work so fingers crossed.

The only problem I have is that the LINX 7 is running on battery, and it's not that great time wise so I am looking for a Y cable to enable charging and simultaneous USB control, I have tried one from AMAZON, but it is no good on the LINX, does anybody know of one that will do the job.

Thank in advance.

[jaydeeuk1]

I don't have that tablet but i've heard it supports otg connection and charging simultaneously. The recommended device is this for £5

http://www.amazon.co.uk/Vktech-Micro-Charge-Samsung-Galaxy/dp/B00MRMK6CG/ref=sr_1_sc_2?ie=UTF8&qid=1417345642&sr=8-2-spell&keywords=ota+charge+usb