Jump to content

sgl_imaging_challenge_2021_annual.thumb.jpg.3fc34f695a81b16210333189a3162ac7.jpg

IC 5070 Pelican


Recommended Posts

Joint Venture with twin Taks at Kelling Star Party between myself and Stephen on here


 


 


FSQ-85 and FSQ-106 both reduced (0.73x) with the QSI 690's on the back.


 


31x600s Ha


23x600s Oiii


20x600s Sii


 


 


42a18a978e7d7925be856da3ffff5d8a.1824x0_

  • Like 18
Link to post
Share on other sites
  • Replies 38
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Joint Venture with twin Taks at Kelling Star Party between myself and Stephen on here     FSQ-85 and FSQ-106 both reduced (0.73x) with the QSI 690's on the back.   31x600s Ha 23x600s Oiii 20x60

tried another process but maybe a bit dark

Firstly.... great image! But how to deal with the cyan stars? You can get most of the stars by using the reduce colour noise command in Ps, that will white-out all but the largest of your stars. The l

Posted Images

Oh wow, I really really like this. The texture that you have managed to bring out is fabulous and the light gives some excellent depth to the image.

My only criticism, if I may, is that the stars are suffering from halos quite a bit. It would be worth addressing that perhaps. I wish I could offer advice on how best to fix them, but here my inexperience shines!

It's a stunning image though with a great colour pallette. It's good to see a joint venture too. From the images starting to show up here it seems as though Kelling was good this year.

Good work!

Link to post
Share on other sites

I'm sure that someone who really knows will pitch in soon, but in the meantime...

As far as I know, the halos are caused by different star sizes between the three filter layers, Ha stars generally being smaller than OIII & SII. So, the larger stars need to be tamed. You could try selecting brighter stars, then a minimum filter and finally fade minimum (in PS) to the offending image layer(s).

Cracking image though and I only want to try and help you make it perfect!

Link to post
Share on other sites

Great detail - Really love the texture :D

My star halo trick is very 'bodgit and run' I'm afraid, so if it doesn't work don't blame me!! I use the elliptical tool to highlight just outside of the halo, then go into either curves, levels or saturation, depends on what I think will work best, and play with the sliders until they look better!! Oh how I wish I could give you a more succinct and accurate reply! 

Link to post
Share on other sites

Derbyshire rules on this one. Fabulous image, really like the detail on this. I shrink my stars with PI (check the tutorials on the forum)

or I use Startools - worth the asking price for this feature alone IMHO.

Steve

Link to post
Share on other sites

Firstly.... great image! But how to deal with the cyan stars?

You can get most of the stars by using the reduce colour noise command in Ps, that will white-out all but the largest of your stars. The larger ones however, are a lot more difficult to correct, maybe a combination of magic wand and de-saturation?

Something a bit like this: 

post-5513-0-35719700-1412421074_thumb.jp

  • Like 3
Link to post
Share on other sites

As some of the stars are possibly behind the gas would they not appear a different colour to white? For example the large star in the centre would appear cyan as it is behin the blueish gas!!

Please correct me if I am wrong.

Link to post
Share on other sites

Velvet, what colour mapping is this? Usually, Ha is so abundant that it may well blow out during stretch, so I guess you have Ha in the blue? It can also be halos...

/p

ha green

oiii blue

sii red

  • Like 1
Link to post
Share on other sites

thank you all for you comments :D  Stephen and I are very pleased with it, but i think i need to learn more of PS as i dont have PI

velvet 

Edited by Velvet
Link to post
Share on other sites

Firstly.... great image! But how to deal with the cyan stars?

You can get most of the stars by using the reduce colour noise command in Ps, that will white-out all but the largest of your stars. The larger ones however, are a lot more difficult to correct, maybe a combination of magic wand and de-saturation?

Something a bit like this: 

i cannot find reduce colour noise in PS..... can you point me in the right direction please

Velvet

Link to post
Share on other sites

i cannot find reduce colour noise in PS..... can you point me in the right direction please

Velvet

Filter --> noise --> reduce noise. Reduce colour noise is the 3rd slider down.

Hope that helps.

Link to post
Share on other sites

This is the last word in finesse so far as the nebulosity goes. Exquisite.

Do you have Noel's Actions, or whatever it is now called? Well worth having and inexpensive. If so, I'd find out by splitting the channels which channels have the largest stars then run the Make Stars Smaller action on the large star channel(s), mabye a double iteration on the biggest.

Great. Collaboration is such a good idea. The beautiful targets out there deserve it.

Olly

Link to post
Share on other sites

i cannot find reduce colour noise in PS..... can you point me in the right direction please

Velvet

Sara got there before me :) (was out last night!) but when using the command its probably better to use it on your RGB layer before flattening the image (ie: dont apply it to a finished work)

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.