technomate Posted January 28, 2014 Share Posted January 28, 2014 Has anybody used a pololu maestro 6 Channel board to drive a focuser motor via usb, from say c2a with eqmod ,if so can you help with an ascom driver for the pololu.Any help would be appreciated. Link to comment Share on other sites More sharing options...
Wetsparks Posted January 29, 2014 Share Posted January 29, 2014 To the above question, No.However, one point that may or may not be relavent. This board is a servo controller. Servos tend not to have a 360 degree rotation but more like a 240 degree arc. I would just make sure this controller can cope with and record multi 360 degree rotation. Link to comment Share on other sites More sharing options...
technomate Posted January 29, 2014 Author Share Posted January 29, 2014 Hi Wetsparks The answer to that is i use the pololu in its digital output configuration to control a dc motor chip , ie 0,1 one direction, 1,0 the othe and 0,0 stops the motor. thanks for the reply Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.