Gweedo Posted April 7, 2013 Share Posted April 7, 2013 I'd previously modded my Telrad to put in a dew heater, but it was eating batteries and they made the whole thing a lot heavier so I decided that I'd make a dewshield.I had some thin titanium sheet and made a paper template to ensure a good fit and attached it with some 0 size machine screws. Whilst I was at it, I made up some new larger adjusting knobs out of aluminium and knurled them for a better grip. Whilst I was doing this the thought occurred to make a better speed control knob for the focuser so I made one up as well. Link to comment Share on other sites More sharing options...
Steep Posted April 7, 2013 Share Posted April 7, 2013 That's a really neat job, it looks very professional. Link to comment Share on other sites More sharing options...
Fivost Posted April 8, 2013 Share Posted April 8, 2013 That looks fantastic! Link to comment Share on other sites More sharing options...
majapala Posted April 8, 2013 Share Posted April 8, 2013 Great job. Makes my 50p fab foam from hobbycraft home made dew shield look like a blue Peter job (mind you, it does work though). Link to comment Share on other sites More sharing options...
JamesM Posted April 9, 2013 Share Posted April 9, 2013 Congratulations on a very good job and is robust enough to take on the rough and tumble of packing your kit away if you have to set up each time.Very inspiring!James Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.