astronomerchris Posted January 4, 2013 Share Posted January 4, 2013 I finally found out what was wrong. Link to comment Share on other sites More sharing options...
Adamar98 Posted January 4, 2013 Share Posted January 4, 2013 Looks fine now. What was the problem? Link to comment Share on other sites More sharing options...
Gonzo Posted January 4, 2013 Share Posted January 4, 2013 Looks fine now. What was the problem?I'm also curious about it because it's a cracking picture. Please share with us. Link to comment Share on other sites More sharing options...
jackrussell0232 Posted January 4, 2013 Share Posted January 4, 2013 Go on then, what was it? Lens cap still on? Shed roof still in place? Not looking at M31 by mistake?Put us out of our misery, because this is a great shot of the main part of M31 - what did you have before? Link to comment Share on other sites More sharing options...
astronomerchris Posted January 5, 2013 Author Share Posted January 5, 2013 At first I was stuck with the image attached below. I thought it was an issue with field rotation because PixInsight said there was -.28 degrees field rotation between each image.You'd be surprised that all that smudge in the upper left was because I was stacking a image that was smeared most likely by the telescope possibly being nudged. I noticed there was a time difference in the files so that's what made me think the image was bad. After removing the bad image from the stack it came out nicer. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.