Recently Browsing 0 members
No registered users viewing this page.
By Marv A
On September 18th 2020, I was observing Jupiter through my C8, with 26mm eyepiece and had my Sony A9 attached for eyepiece projection when I noticed the ISS make a pass overhead.
I set my A9 to 1/800 sec and ISO 2000 and was able to capture a pic by hand guiding my guidescope and keeping the ISS on the crosshairs.
I was pleasantly surprised by the outcome, comments welcome at my first attempt at imaging the ISS.
Hi! I'm Fran
Not so long ago I took a picture of the ISS I never thought I was going to be able to get with the equipment I have.
After saving for a long time, I was able to buy my first scope, an OTA Skywatcher 200P. I adapted it to be used in a dobsonian base because it was the cheapest way I had to get it to work.
One night, I thought it might be cool to try to aim and record with my phone an ISS pass overhead. During the first attempt, I messed up the focus extremely bad but you can't imagine how happy I was to get a white blob in a frame that only I knew was the ISS.
The following afternoon I tried again. This time the flyby was almost exactly overhead and the night was crystal clear. So I manually tracked the station looking through the finder scope and recording it with my phone at 1080p 60fps. Without much expectations I downloaded the files into my computer to review them. And was shocked with the results.
The video was processed with PIPP, AutoStakkert and RegiStax.
If someone told me the image was taken with a phone and manually tracked with a shitty dobsonian base I would not believe him! I got really lucky that night, but I can not be happier with the results. I believe I got to the edge of what I can accomplish with the equipment that I was able to buy. I'm not sure if ext step up should be a real camera or a mount. Anyway, any of them are too expensive 😬
If you want to see the frames before processing (and some nice shots of the moon that night), I'll leave a link to the video where I show them:
Thank you so much for reading it all.
Hi guys, firstly - sorry if this is posted in the wrong place.
I've just ordered a Canon 600D to start doing some astrophotography and it arrives tomorrow - I'm stoked. I've been wanting to get into astrophotography for a while now and I'm so happy to finally be pulling the trigger.
The last item on my shopping list is a solid beginner telescope which would couple well with my Canon 600D. The research I've done is all pointing towards a newtonian reflector.
My primary goal here is to take some pictures of stars and planets with the Canon 600D attached to the telescope. I've been looking at the Sky-Watcher 114/900 as it's relatively cheap, which I think is great for someone just starting off - but was wondering what your opinions were seeing as you've all been through this before. Do you have any other recommendations? I'd like to keep my budget up to £300, and that's stretching it really.
Thanks for taking the time to help!
As my GoTo is successfully finished (some cosmetic issues remain) I shoud focus my attention on planets' positions. I have proper source of information: fantastic book "Astronomical Algorithms" by Jean Meeus, thus I will sort the planets soon. But planets are not a challenge for me at this moment, they are just something obvious to do in my list.
I have another idea and ambitious plan for next project within the year: locating and tracking the ISS to be able to make a video of its fly, not only transition.
Similarly to other objects, I need some equations. I'm pretty sure they are available somewhere, because plenty websites or apps offer showing current position of the ISS.
I will use this topic for sharing a progress ot the project.
Hey all, I cannot believe my luck. I was out on the 31st July practicing imaging Jupiter and Saturn with the my new ADC and ZWO Asi224MC. All of a sudden the ISS started to appear from the South West heading East. I quickly released the clutches on the mount and followed the ISS the best I could with the finder scope. Everything was set in sharp cap for the Jupiter capture, ROI was set to 320 x 240, 2x barlow plus ADC. I could not believe it out of 6500 frames I manged to find 13 frames, which I stacked. Second bit of luck, PIPP said it could not find an object, so I turned the option off and it ran without errors. The hero was AutoStakkert which sorted the frames to the front of the ser file.
Composite of 3 images from my night: