frame rate for sbc 2000

[steelfixer]

Hi all.

Just a quickie as a matter of interest.

When I use Sharpcap it automatically sets the frame rate to 30fps.

Is this correct for the 2000 I thought it worked at 60fps.

If it should be higher how do I set it up?

Any thoughts on this would be appreciated.

Thanks

Graham

[DoctorD]

Hi

The NTSC version works at 60 fields or 30 frames per second - the PAL version is 50 fields/25 frames per second. The output is interlaced.

Hope this helps.

Paul

[steelfixer]

Thanks Paul.

You have just answered my question in one go.

I was getting the fields and frames mixed up.

Mine is the NTSC version so all is running as it should be.

Thanks again

Graham