Sgt.Pepper Posted April 29, 2011 Share Posted April 29, 2011 Can anyone tell if the chrome collar on eyepieces should fit all the way down into the focuser, or can it be placed anywhere that achieves the best focus through the EP? Link to comment Share on other sites More sharing options...
Dob Posted April 29, 2011 Share Posted April 29, 2011 It should fit all the way down into the focuser. Link to comment Share on other sites More sharing options...
TheThing Posted April 29, 2011 Share Posted April 29, 2011 If you need to, you can move the EP in and out of the draw tube to obtain focus.Make sure the grub screws are tight though! Link to comment Share on other sites More sharing options...
Moonshane Posted April 29, 2011 Share Posted April 29, 2011 I agree with Hugh, ideally it should be all the way in but as long as there's a short section inside of the grub screw/compression ring and they are 'snug' then it won't be going anywhere. Link to comment Share on other sites More sharing options...
Slangers Posted April 29, 2011 Share Posted April 29, 2011 I always put it fully in the focuser or barlow. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.