Search the Community
Showing results for tags 'eq5 pro'.
Found 3 results
I own a polarscope from FLO for a couple of months now, however I have never been able to get a correct polar alignment. When I screw in the polarscope in the mount completely then the 3 angle is at the top (see picture). However with this polaris keeps moving out of the circle when I polar align it. (Polar alignment seems not to work) When I loosen it I can get the reticule to 0, however the polarscope is very loosely in the mount. How to best get the polarscope correctly into the mount and get an accurate polar alignment.
Hi all, Im living in a fairly light polluted area, and have a Skywatcher 200p on an eq5 pro mount. I've been using my phone to take pictures of varies objects with varying degrees of success ( mainly due to mounting my phone to the telescope) but ive decided id like to take imaging a little more seriously and am looking to get a DSLR with the interest of deep sky astrophotography. having said that i dont have £5k for blow on a camera and am looking to spend around the £100 mark, but dont know cameras and dont know what the best camera in my price range would be. I realize i wont be able to do too long a exposure because of my mount being unguided and it being a eq5 pro not a Heq5. any recommendations or advice would be greatly appreciated. Daniel
Hi All I have recently started using EQMOD to control my EQ5 Pro mount. When I use the mount with the SynScan Hand Controller I have noticed the usual backlash in the Declination axis when reversing the direction from north to south or vice versa. In the SynScan Setup/Backlash/Declination menu option, I find that setting this to 0deg 0' 50" (ie 50 arcseconds) compensates for the backlash when using the hand controller. My questions are these; When using EQMOD and the PC Direct mode setting on the hand controller, is this Declination Backlash compensation still applied? (I suspect not) Does EQMOD have the functionality to apply similar Declination backlash compensation when using the the direction buttons in EQMOD to control the mount? I intend using EQMOD's Pulse Guiding and see that there is a Declination backlash compensation for this feature. Please bear with me whilst I ask another couple of questions; I intend to use PHD2 as the guiding client. I think that PHD2 will 'build in' backlash compensation when it performs its calibration. If this assumption is correct, does this mean I do not need to enter any value into the Backlash compensation in the guiding area of EQMOD? Out of curiosity more than anything else, what on Earth would the value be I should enter in the EQMOD backlash compensation? On the SynScan the backlash compensation is entered as an angular measurement (ie 50 arcsecnds) but in EQMOD guiding it seems to be entered as a time value (ie between 0 and 2000 milliseconds ) Anyway, thanks for looking.