Search the Community
Showing results for tags 'dust bunnies'.
Found 1 result
Hi All, I am posting what I suspect is a newbie mistake question but hoping that someone can assist with the issue of flats. Although I have been fumbling around the sky, taking snaps at leisure, recently I became serious. I have read up about the different calibration files (flats, darks, bias) and they seemed to make sense; different ways to capture the image defects and extract those from the image of the sky. After a few weeks (months) of further fumbling I went back to the very first target to receive my attention, M42 Orion Nebula. In short, I took 20x 30s exposures in LRGB and ran these along with 20x LRGB each of darks, bias and flats. To obtain the flats I used a diffuse sheet of perspex (lightbox material) and an LED video lamp that has 180 white LEDs, turned to its lowest setting. Attached below is the stacked Luminance flat and the light image. In the lights I am getting very strong marks from dust and I had thought that the flats would subtract this but looking at the flats the marks are completely different shapes and do nothing to remove them from the lights. The attached has been further stretched to show the issue. Now, I am obviously doing something wrong but I have no idea what, any pointers from the vast pool of knowledge will be much appreciated. Thanks, Anthony