Search the Community
Showing results for tags 'asi1600mm-pro'.
Found 4 results
Hi, I have taken mono LRGB images of M51 with my new ASI1600mm-PRO. I have a mix of 30s, 60s, 120s subs. 100 darks, and 100 flats for each filter. About 4 hours total. I Used DSS for alignment and stacking, then Pixinsight for LRGB combination. My issue is that i'm not happy with the colours, the stars all appear white and the background is strange. I have attached the Aligned LRGB images. Can anyone point me in the right direction? Thanks! Green.TIF red.TIF Lum.TIF B.TIF
I went to my family house in the countryside and was able to take some pictures during xmas eve. Total exposure: 6h H_Alpha: ~3h (730x15s) --> R, G Oxigen III: ~3h (710x15s) --> B, G I didn't have a view on Polaris and could not spend too much time drift aligning (it was xmas eve after all :D) hence the short exposures. Moreover I dont have the proper connection rings to put my flattener on my mono camera so all stars off center are a mess :_(.
Hi everyone - it's been a while! This has been on my hard drive for almost 2 months and I finally got round to processing it...it was quite optimistic of me to try and image this from my Bortle 7-8 back garden, but I gave it a go! While the nebula itself is clear to see, all those gorgeous dust clouds surrounding it were extremely hard for me to capture from my location without a lot more integration time. I think I'll head to dark skies to capture this one next time, along with some more focal length! LRGB shot with ASI1600MM Pro and WO Z73. 2.9 hours of integration time. Full details here. Thanks for looking!
Which cooled mono cmos - 1600MM-Pro or QHY163m?? On the face of it there's little to distinguish between the two. Same sensor, similar price etc. I see the zwo has a 256mb buffer compared to the qhy's 128Mb but I can't see that would make any practical difference for longish exposure dso imaging. Both have amp glow suppression? Heated windows? Usb hub not a factor. I wouldn't be using with a filter wheel - just a filter drawyer with 2" Ha. Is there anything to distinguish between the two that might tip the balance?? Thanks for any replies Louise