Search the Community
Showing results for tags '90mm'.
Found 6 results
Hi everyone, about a month ago i got my first telescope. Wasn't sure what to get but i wanted something portable and easy to setup and use. After some internet "research" i decided to go for a refractor on a manual alt/az mount. The telescope was on a 50% sale so i decided to go for it , the Meade infinity 90. The package: The scope came in one big box, everything was inside. Included was the optical tube, the mount, 3 eyepieces (6.3mm, 9mm and 26mm), a 2x barlow lens, 90 degree diagonal, red dot finder, an eyepiece holder for the mount and a few manuals. The optical tube: The tube has a 90mm (3.5in) aperture and 600mm focal length. It looks and feels as a quality instrument, it has a small dew shield and the focuser is smooth when you move it back and forward. As expected the lens looks to be coated. It has a dovetail bar on it with 3 holes for screws. The mount: Light but stable, made of aluminium. It has 3 extendable legs, and 2 slow motion cables (alt/az). One screw to mount the tube on on top (adjustable back and forward). The eyepieces and barlow: All 3 are modified achromat eyepieces, the lenses are made of glass and are OK for the beginner, but i would suggest upgrading if you can. The barlow is bad i even think that the optics are plastic (not sure), it is usable if you don't have other options but this should be the first upgrade in my opinion. Observing: First light: The telescope arrived in the morning so the first thing i did after a quick setup was to adjust the red dot finder. I looked at some mountains about 20km away, the view was nice and very detailed using all eyepieces. Combining the 6.3mm with the barlow got me a bit blurry view, but the barlow in combination with the other eyepieces was ok. Night came and it was a moonless and clear night (only light pollution from the city i live in). I saw orion right infront of me, "marked" it with the red dot finder where i thought M42 should be and looked through the 26mm eyepiece. It was a bit blurry but after adjusting the focus i could see some nice pinpoint stars and also something fuzzy, i realized it was the orion nebula. After letting my eyes adjust to the view for a few minutes i started seeing 2 faint "wings" on both sides and in the center were 4 very tiny stars, i didn't expect to see that on my first night. I followed my target for about 15 minutes using the slow motion controls , it was easy to do. Also tried the 9mm eyepiece and with it the 4 stars were more easily seen but the faint clouds got fainter so i moved back to the 26mm. Next target was venus, i tried all eyepieces + with combination with the barlow. It looked like a very bright half moon without any details. When using the barlow the view was ok but purple glow was showing around the planet, without the barlow the purple wasn't noticeable. I also looked at the star Sirius which looked nice, bright and much bigger then any other star i could see that night. After Venus went down i decided it was enough for day one. Moon: I expected it to look good, but not this good. I was observing the moon for a couple of nights until it got full. I could see a lot of details at the terminator , with low and high magnification. When the moon was full it was very very bright and it looked best with the smallest magnification using the 26mm eyepiece. Jupiter and Saturn: I got 2 opportunities to look at these 2, the first time i think the "seeing" was bad. I could only see Jupiters 4 moons and the planet was a bright disc without any details at any magnification i tried. Saturn also wasn't very good, i could see the rings but they were blurry and "dancing" around. But the next time i had the chance to look at these planets the conditions were much better, first target was again Jupiter. With the 26mm eyepiece i could see a white disc with 4 moons.With the 9mm i could see the moons again but now the disc had very faint 2 bands without any color. The view was best with the 6.3mm eyepiece, the 2 bands were clearly visible and on the upper belt on the right side there was a small dark dot, i am not sure if it was anything . Next target was Saturn, event with the 26mm eyepiece i could see that it has rings, i switched to the 6.3mm right away and wow there it was, Saturn and its rings clearly visible, i even think i could spot the cassini devision, but it might have been my eyes playing tricks. I tried using the barlow on both targets but it was making the image blurry, but at this point i had purchased a higher quality barlow and the views were very nice with it , but the max magnification i could use that night was 133x, anything higher and the image was getting wobbly (probably that was due to the atmosphere that night). After that some clouds came in and it was time to get back to bed (got up just to see the planets in 4am). Conclusion: I think i got what i wanted, a small and very portable telescope for some basic amateur observing. I do recommend this telescope to anyone as a first telescope or even to an experienced astronomer who is looking for something light, portable and being able to set it up and start observing in 2 minutes. Also i would recommend you replace all of the eyepieces and the barlow. I got me a few plossl eyepieces and a nice barlow, it was worth it. Feel free to ask me anything regarding this telescope i will be more than happy to answer. Sorry for any spelling mistakes this review probably contains Also i am attaching a few images i took directly off the eyepiece using my smartphone (handheld). The Telescope The Moon: The Moon: Venus: Saturn: Jupiter:
I bought this second hand, but it was almost untouched, and a relative bargain to boot. New it costs 1199 EUR from TS (approx. £1035 as of 08/03/2019 but who has any idea how this might fluctuate). Highlights: Apo air-spaced triplet with FPL53 Multiple focus positions thanks to removable tube segments 2.5” rack and pinion focuser, rotatable, dual speed controls, 6kg payload, with printed scale CNC tube rings and dovetail supplied Retractable dew shield First impressions: It’s a really nice box. Whilst it’s described as a ‘transport case’ the supplied storage box is sturdy and well made. Inside, the foam fit is precise bordering on tight. It’s actually mildly difficult to get the scope out of the box. Things get a little easier if you loosen the tube rights slightly, allowing for some tube rotation, and a longer term fix will be some straps to aid lifting the scope out vertically. The scope itself feels very well made, and is what I’m choosing to refer to as ‘reassuringly weighty’. At just over 4kg (without diagonal, eyepiece, or finder) there are definitely lighter options available, but it’s hardly a heavyweight. The finish is powered coat white, which looks and feels very nice. The focuser is very smooth (compared to my SW ED80) and feels pleasingly solid. I’m not going to be testing the stated 6kg payload any time soon, but I can easily believe it will be able to handle it. The dew shield is held in position with a single thumbscrew, and whilst it’s retractable credentials are clearly warranted, it only seems to extend a couple of centimetres. As it happens, this takes the overall length down to 450mm which was the very top end of my acceptable range in order to meet my ‘travel’ requirement. The focuser body also incorporates a finder shoe, but if you wanna finder then you have to supply your own as there’s nothing included. The idea of having additional tube segments is that you don’t have to rack out the focuser so far, and so improves stability. This also allows for multiple reducer/flattener options for imaging use. The TS website details the specific configurations using their recommended equipment which provide a faster f/4.9 option for sensors up to 36mm, or a full frame flat image at the standard f/6.6. I might be exploring these options later, but for now, this is going to be for visual use. First light: OK - this barely counts, but I was impatient. Predictably enough, first evening with a new telescope and it’s raining. But I did manage a pretty decent look at my neighbours TV aerial and chimney stack. They need some re-pointing. … The following evening (9th March 2019) was less rainy, but much the same for cloud, all but for about 30 minutes of relatively clear sky, interrupted regularly by patchy cloud. So still not great. However, my ambitious setup to allow for cooling paid off and I did manage a few minutes of actual use with a SW 28mm eyepiece. The Baader Zoom I also treated myself to for my travel use is frustratingly still not dispatched. And when I say set-up, I mean just carrying everything outside. I’m using this on the SW AZ-Gti mount, and a Manfrotto tripod I had already, so it’s very easy to pick up and take outside. I was using the scope with one of the two removable sections in place (this is how it is stored in the supplied case) and was able to achieve focus with a 2" diagonal without having to rack out excessively. Sirius was an obvious target to the south, and an easy hit. Brilliantly bright, as expected, and a blue-ish white colour. The upper half (the rest was below my sightline from home) of Canis Major was easy to see, with several of the background stars also visible. Despite the less than great seeing, the view was impressive. Stars were tight and there was no obvious chromatic aberration. Moving up to Betelgeuse, it’s orange-red brilliance was very pleasing, and again I was able to make out some of the fainter surrounding stars. Overall the view was very impressive, and bright. My only real comparison is with my SW80, and of course I now have over 25% more light, so that’s to be expected. But still, it makes an obvious difference. I wasn’t able to note any CA or distortion, and a quick full visible spectrum (no filters) star test reflected spot on collimation and no apparent astigmatism. Alas, the break in the patchy clouds did not last long, and I was soon packing up for the night and heading out for a beer. I’m looking forward to getting some more quality time with this kit, and who knows, I might even align the AZ-Gti next time and write a brief review for that too.
Just been out observing Saturn! I saw cloud belts and a Cassini division and the best thing was I was only using a little 90mm refractor, the view was so clear and sharp and full of detail! Never new a scope that size could provide such a good view!
Hi all. Looking at possibly getting a secondhand Opticstar AR90S f5.5 short refractor, primarily to use with binoviewers, but also to use on my Goto mount I have, and possible in the future too for some EAA too perhaps.. Looks like quite a good quality scope so just wondering if any members have/had one and how it performed for you. Cheers, Gus
Hello guys as you see i am new in the forums and im starting my stargazing adventure.I want to use my telescope as an astronomical and a terrestrial telescope so preferably a mak or a refractor.My budget is 450 dollars for both telescope and tripod. I already found one good telescope http://skywatcher.com/product/bk-1206az3/ Its the skywatcher 120/600. Let me know if you have any other telescopes.Thank you
I am looking for an airline-compatible APO. However, small size is not the only factor, I want it to be a great all-rounder, performing well for both visual and photographic deep-sky work and visual planetary. I'd also use the scope for daylight birdwatching/photography. Currently I have an C5 omni XLT, which I feel limited (lack of contrast). I didn't carry around the c5 too much, but provided I pick up a lighter mount (astrotrac...) this bulk and weight should be OK. Currently I have 3 candidates: 2nd hand TMB-92 Signature Series f/5.5 2nd hand TS Photoline 90mm f/6.6 (a bit heavier but cheaper ) Primaluce Airy Black 90T or the equivalent but cheaper Technosky 90 (both should be Shaprstar scopes). Which one would you suggest? As for mobility, the scope + mount head (sky adventurer??) must fit in a smaller hand luggage, the rest is not important, because I usually hire a car at the destination.