Search the Community
Showing results for tags 'eqm35'.
Found 3 results
Hi all, First of all mine english is not so good so sorry for that. I am a new to astrophotography. And my setup is Mount : Skywatcher EQM 35 PRO Tube : Skywatcher Explorer 150PDS (newtonian) Camera : Canon 550D Guide scope : Svbony 60mm compact guide scope Guide cam : Svbony SV105 I know my setup is weak and cheap but for now I have them (budged problem ) I started the hobby at May and I took some photos that not bad for beggining. I reached 60-90 seconds without guiding. After that I thought that the time for starting improve the guiding and I bought guiding scope and cam. I know the cam is not for guiding but it was cheap, and I am planing to change it with mono guide cam (like zwo asi120 mono) at next months. But my first experience for PHD2 was terrible. I've detected some errors and tried to fix them. First thing there was a unbalancing. I mounted the guide scope on the position of finder scope which is very close to edge of the main scope. So I fixed it (after the night I tried to guide with PHD2) and put it on the bracelet (over and middle of the main tube) And second thing was that there is a backlash and I tried to fix it too. I opened to gear of dec and adjusted to gear mesh. Except them the alignment was not so good because location was in the city (bortle scale 9) and I haven't got finder scope as you know. So I am not sure that if the stars (3 star alignment method) are correct because with nacked eye I could't see them. Next time I will do better alignment with finder for sure. After them I am planing to try next weekend again. But before that I need your advises to eliminate the problems which I couldn't detect or I don't how to fix them. For example I can not see any pulse for RA on the graph what does it mean and how can I fix it. And also I am not sure if there is any problem with ascom. There is no option in the drop list for EQM 35 PRO. So I choose ASCOM.SkyWatcher.Telescope and I downloaded/installed ascom driver from webpage of skywatcher. Thank you PHD2_DebugLog_2020-09-21_100115.txt PHD2_GuideLog_2020-09-21_100115.txt
I've just managed to get hold of an AsiAir Pro. First impressions are just spot on. I had a little concern when it arrived as I wasn't sure if it would handle a USB hub. Much to my surprise it did! I connected the following to make sure ZWO178mm Main Camera at present ZWO120mm Mini Guide Scope ZWO EAF ZWO EFW Mini Filter Wheel SkyWatcher EQ 35 Pro via USD with Direct PC Connect option using the EQMount INDI driver Powered EQ Mount, EAR via AsiAir Pro All connected successfully. Will keep updating as I start to use
Hi A very newbie question here but for the life of me cannot figure it out. Have an EQM35 goto mount linked through a skywatcher wifi dongle to a synscan pro app on my android galaxy s9 phone. I van use the app but have a couple of things that are either greyed out or dont operate when pressed: 1. Point and track 2. Doesn't seem to track (tried the.moon) using lunar tracking but mount doesn't move Thanks in advance for your help. Tim