Jump to content

raadoo

Members
  • Posts

    109
  • Joined

  • Last visited

Everything posted by raadoo

  1. It seems entirely unlikely that we should ever see an aurora at 46 degrees north, but there it was tonight. Started out as a massive deep red cloud and just before disappearing it did a nice song and dance in purple and greens. Sol's CMEs definitely gave us a show for tonight.
  2. For a minute there I thought you had two identical setups next to each other 😅
  3. No one has mentioned it, so I'll chip in another candidate: the Orion Optics OMC 140 https://www.orionoptics.co.uk/product/omc140dx/ I don't have personal experience with one, nor can I remember anyone who has, but it does fit the requirements, albeit at a much higher price than the aforementioned Bresser and Sky-Watcher alternatives.
  4. Food for thought, indeed. Alternatively, I could reconsider the 8" f/4 and try and pair it with the minuscule pixels of my 183. Definitely have to do some back-of-the-napkin math for this one.
  5. There does seem to be a very steep increase in price when you move from f/4 to anything faster, when it comes to Newts. I'd expect them to be more expensive but for a wee bit faster aperture you seem to be paying out of every orifice. Good shout about looking for a used hyperstar; maybe pairing it with a standard 9.25 to keep cost down. RASAs are the fastest option by far - my only concern is that they're a bit of a one-trick-pony. You can always un-hyperstar an SCT and use it for planetary work. And you can always chuck a 1.5x Düring Barlow on a Newt. But a RASA is a RASA is a RASA.
  6. I'm using an RST-135, and having had a Mewlon-180c in full imaging garb on it with good results (measured at 80cm from front to camera), I'm quite confident in its ability to handle a similarly sized Newt.
  7. I've googled long enough to confidently resort to your collective knowledge in helping me track down a bit of unicorn. We all have some personal limitations when looking at OTAs and quite often they refer to size. In my case, I'm limited by my long, but narrow, balcony - specifically 90cm. This 90cm limit includes image train and possible dew shield. As I'm looking to dip my toes into some short exposure DSO imaging, aperture and speed are my main priority for any OTA, so a fast Newt seems like the most cost effective way to get there*. The obvious go-to would be a 10" f/4 but a quick bit of math puts any Newt of that configuration at about 100cm long. An 8" would fit, but I doubt that's enough aperture for the intended purpose. Anything over 10" would be too heavy for my mount and certainly longer than my 90cm limit. To cut a long story short: Does anyone know of a 10" Newt with a native f ratio of between 2.8 and 3.5? *RASA / Hyperstar setups fit the bill but cost is beyond what I'd be comfortable with.
  8. Thanks so much for taking the time to reply, Tim! Thankfully, I won’t need to move the CAA’s position as, upon close examination, it turned out that there was a 30mm extension sandwiched between focuser tube and CAA. It came attached to the scope so I didn’t give it a second thought, believing it to be part of the focuser tube itself. Having regained about 25-30mm of focus travel, I’m positively jubilating, not to mention grateful for your help!
  9. Brilliant solution and one that certainly makes sense! My CAA is a measured 20mm thick so I'm slightly doubtful that moving it after the reducer will not overshoot the backfocus requirement. What does your image train consist of, if I may? It'd be massively helpful. Thanks!
  10. I believe I've landed in stump-land with a new imaging setup I'm putting together. In a nutshell: dialling in proper backfocus for my reducer causes the focuser to lose inward travel. In depth: I used the classic "look at the stars in the corners and add shims until they no longer radiate" and I'm very close to getting it perfect (<1mm). Trouble is, as I've increased the distance between sensor and reducer, the focuser (situated between scope and reducer) has had to move ever more inward to achieve focus. This to the point that I now have no more inward travel available and cannot achieve proper focus. I'd massively appreciate any ideas, thoughts, opinions or guidance. _ Image train is: FS-60CB ⇢ CAA (TKA21200) ⇢ Reducer (TKA20580B) ⇢ Adapter to M48 ⇢ OAG ⇢ Filter Slider ⇢ Shims ⇢ Camera
  11. It's been a while in the making, but here's my little 127 in full imaging garb - the odd imaging mak among so many visual setups in this thread. I figured you lot will get a kick out of the sheer madness of this setup, so I've marked up what's what. Before anyone jumps in, yes, I know I'm oversampled and I know that Maks aren't the best tool for imaging. That being said, last night was the first clear night since end of October, so I've quickly started working on M81. The below is just 2h, but I'm aiming for somewhere north of 20h in the end. It ain't perfect, but it's better than nothing!
  12. It seems someone at TS has been listening. They just released an adjustable corrector: https://www.teleskop-express.de/shop/product_info.php/info/p16155_TS-Optics-Full-Format-0-8x-Corrector-for-APO-Refractors---M92x1-Connection---ADJUSTABLE.html
  13. You could have a go using one of the variable adapters that you see from TS / Altair / Optec? They promise to allow you to fine tune the backspacing without taking things off the imaging train. I have no personal experience with these adapters, but perhaps SGL members who do can chime in.
  14. Right, guess I'll play the outlier, then. By the looks of it, a lot of things in this astrophotography business are new to you, so I'd suggest swapping the Mini PC for an ASIAir Mini (hold that thought*) as a stepping stone while you get familiar with all the terminology, quirks and, overall, your setup. I believe the most important thing to actually driving you forward in imaging the night sky is, well, to actually produce an image or two. The sooner you can produce an image, the less likely you are to abandon the practice altogether. For all their faults, ZWO have actually put together a decently intuitive interface in the ASIAir. There's not much in it to trip you over, barring the social features they added in the latest firmware. It's a fairly straightforward path of Focus > PA > GoTo > Guide > Autorun that can get you looking at subs coming in within about 15-20min. NINA is very powerful, supports a myriad of devices, can automate everything and their grandma, you can enhance it even further with plugins and it's open source, to boot! There's two things I'd argue that NINA does not do well: 1) have a progressive, easy to follow, beginner astronomer's guide and 2) an interface that most people, but especially newcomers, find intuitive and easy.1 * I'm specifically suggesting the Mini version of the ASIAir as it's the least expensive way to get the Air experience, at £228. Once you feel comfortable to use the Mini PC as the permanent brain of the whole operation, the ASIAir will, effectively, become either a backup or, more likely, a sparkly red paperweight. Or, if you end up like us lot, use it as an excuse to get another telescope. 1. I'm actually working on contributing to NINA trying to address these very two features; if everything goes well these two points may become soon-to-be-forgotten history.
  15. For anyone else that may find themselves in a similar situation and the shoe sole trick doesn't work, you're probably slightly screwed. I reached out to ZWO directly to ask about the adapter they use for their mini cameras. They didn't mention the thread on the cameras, but did try to sell me a replacement: It is possible to purchase the black adapter separately. It is $10, and the shipping cost is $30, so the total price is 40USD. Needless to say, I wasn't too happy about the idea of paying $50 (that's including VAT and customs) for a tiny, simple, thread adapter. I then reached out to the fine folks at TS, but they unfortunately don't stock any such adapters. 👟
  16. Finally got around to trying some other methods and your shoe sole idea kept lingering in my head. Turns out, this method works best when you use the heel side of the shoe. Regardless, it worked! @david_taurus83, I cannot thank you enough for what seems like something I should have known already.
  17. I think you went about it the best way possible, by building an arsenal that [almost] doubles focal length with each step. Camera and sampling notwithstanding, this is likely the best way to grow into ever more magnification without hitting that proverbial learning curve too hard. You've now got: 135mm (Samy) 250mm (Redcat) 540mm (TS) Looking into my crystal ball, your next additions should be something like: 1000mm (8" f/5 Newt) 2032mm (8" SCT) 3910mm (14" SCT) Looking forward to seeing if my predictions turn out. 😊
  18. Gave this one a go as well, using a low power heat gun. The threads must be bound really tightly cause there was no give.
  19. Wasn't aware of that technique. I gave it a go, but sadly they didn't yield.
  20. 😂 I guess I could have titled this thread a bit better!
  21. No damage yet, though I have gone hulk on it, trying to pry the filter off. So, yeah, filter won’t unthread; it’s definitely bound on there. I’m looking to replace the 1.25” adapter so I can use other filters.
  22. Weird that the pitch of the thread is the only difference. Any idea where one can source one of these adapters from?
  23. You know the little black thread adapter that ZWO have on all their guide cameras? Well, apparently, if you leave a filter on there long enough it binds itself to the threads so much so that there's no way to unscrew the filter without destroying the whole thing. 🤷‍♂️ I'm thinking these shouldn't be too expensive to replace, but for the life of me I can't find any information on what the camera thread is! 🤦‍♂️ All I can see is that it's just slightly larger than 1.25" (M28.5 x 0.75). Do any of you file folks know what this thread is called / what size it actually is? Even better if you can point me towards an adapter from this unknown thread to 1.25"!
  24. Does anyone know anything about this ASI991MM? https://astronomy-imaging-camera.com/product/asi990mm-pro-asi991mm-pro-2 Apparently, ZWO are entering the scientific, SWIR game?
  25. Here's a step by step that will hopefully this will clear things up: Split your stars and background into two images Use Photoshop's File > Scripts > Load Files Into Stack script to load the two images Once you hit OK in the script dialog you should have the two images loaded as individual layers Make sure the image of the stars is the layer above the background Change the stars layer blending mode to Screen I've attached a few screenshots of what these look like.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.