Jump to content

SkySurveyBanner.jpg.21855908fce40597655603b6c9af720d.jpg

Astroblagger

Members
  • Posts

    975
  • Joined

  • Last visited

Everything posted by Astroblagger

  1. Is this power supply ok to power a heq5 mount from the mains.? It's an old monitor supply I can change the connection at the end to suit the mount.
  2. Ok does this cable go from laptop usb to direct to mount as one tutorial iv seen shows it connected to the handset?
  3. Hello I want to get rid of my handset on my heq5 pro and get EQ mod set up. Is the only hardware i need just the cable? And Where is the best place to pick up the cable? Thanks.
  4. Hello Do you know off hand or can you measure the height of your sw ed80 standard case, just need to know if it will fit somewhere. Thanks
  5. I dropped my synscan handset at the start of the year, now the lower line on the display doesn't work, can this be fixed? or is it a new handset required?
  6. This Time-lapse Vid took me 4-5 years on and off to put together. It was shot at 11 different dark sky locations (as i drive to my dark sky site). Ended up with about 80Gb of raw photos in the end! Hope the video quality is ok as when i watch it on other media like FB and Youtube think the compression is quite high so it looses the quality and doesn't look great. Any feedback on how to improve the output quality it is welcome. Nightsky In Motion TimeLapse.mp4
  7. Fantastic image, my 4 hour attempt at M101 cetainly didnt look like that. superb image.
  8. Hello Im going to be moving soon into a new build so looking at house plans etc trying to predict night time light sources, iv got a good decent 10x10 meters garden, will i be ok with 2 street lights 15 meters away (Pointing so called in the other direction (evil)) to my south or does that make Astrophotography almost impossible? (hoping Narrowband will save me) Iv always driven 1 hour to my dark sky site setup and run with batteries with my Atik 460 and tried not to freeze to death for 5 hours, iv always been limited with my integration time based on how cold i was, id hoped to eventually, by my age build a wee roll off roof place. Can you show me your ideas verses the ****ing lights and light pollution please. Iv never bothered to set up actually in the city as i thought it would be a wasting a clear night. My mount and tripod are always in the car ready for the elusive clear night Eventually Hopefully, clear skies soon. Maybe someones been in the same situation recently? Thanks
  9. Taken on my recent trip to Iceland, with Samyang 14mm and Canon 5D mk2. 30 sec exposure.
  10. What are the major differences between them, im toying with the idea of upgrading from my trusty old HEQ5 cant praise this mount enough its never missed a beat! but my imaging rig is getting heavier now my HEQ5 just manages my RC 6" and camera which of the mounts is better for imaging?
  11. Sounds like i'll stick to -10 subs then, getting a abit technical there, but all good advice, Unfortunately I have to run off batteries, if I give up batteries I have to give up astrophotography! Its hard to acquire images from an apartment 3 floors up. Although I do use a separate 36A/h battery purely for the camera.
  12. Hello Iv been using my Atik 460ex set to -10 degrees, so it will use less power out in the field (I use battery's) will it make a huge difference in noise taking it down to -20? at -10 the subs look fairly clean?
  13. Thanks for the advice Wouter, is there sharpening tools in autostakkert? My corrector plate doesn't look great tbh, maybe I should clean it?
  14. cool video! What software do you use to make the video? im assuming you use Lightroom to batch process all the single images, any timelapse vid Iv put on Facebook seems to darken it ALOT!
  15. Yes I used sharpcap, I took a 1000 frame AVI, and ran it through Autostakkert, I tried to use min Gain to keep the noise down, but maybe I should have raised it up a bit so I could use a quicker frame rate? I didn't run it through any wavelets though? didn't see the option for this in Autostakkert? I just used unsharpmask in PS3. Any ideas what would cause the artefact that Wouter pointed out?
  16. Hi Wouter, criticism is good if it makes you better! The seeing wasn’t to great really. I’m pretty sure the scope was collimatied I put in a 10mm eyepiece and everything looked concentric. Should I be using a Barlow to get better collimation? The focus was the best I could achieve by eye adjusting the focused manually. Im a zwo 120mm , I cant explain what the Artifact is and how it’s shown up? I also shot through a red baader filter. I used autostakkert to stack the images. I had virtually no gain when taking the avi’s and just set the exposure accordingly. any advice welcome.
  17. Is there any difference using the cable or not? Iv got an heq5 will the as com driver be installed on this?
  18. Hello iv just downloaded PHD2, how do I connect the mount now as iv read somewhere you don't need the cable from camera to mount? Is this correct? Do I need to get any other cables?
  19. This is first light for my new RC6" taken with Atik 460Ex 2 hours each of Ha and Oiii filters, This is the first time iv imaged binning 2x2 to achieve the correct pixel size, the image always seems soft and never in focus although i spent ages on focusing correctly. Is this a consequence of binning 2x2?
  20. Hello having just got my hands on one of these it’s very camera end heavy and the dovetail is maxed out to the end. How do you aid yours in balance? I’m not sure a longer dovetail would be good as it might not hold the scope too well?
  21. Really need to read up on the subject of pixel size and resolution. Is there any easy to understand tutorials on the subject?
  22. Evening, i had first light for my new Ioptron 6" RC (from FLO) tonight, thought id go for something that would fill the chip up on my Atik 460EX, can anyone explain what the halo is in the image is it more likely to be a dust bunny in the imaging train or something more serious. Iv only noticed since i stretched the image a wee bit so cant do any tests till i get back out again. its present in all Lum, R,G and B filters so cant be the filters. Also iv been told to bin 2x2 with this set up by the knowledgeable folk on here , is the image soft due to this or is my focus off? used the tool in Artemis to focus so im fairly sure my focus was there or there abouts.?
  23. Thanks Olly, great advice as usual. Would I bin the colour 2x2 aswell or could I bin it 3x3? Hoping a finder guider will do the job, as I don’t want to shell out for an OAG.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.