iwols

hi all after few guide cam problems thought i would start at the beginning and reset the oag ,but when i loosened the screw that secures how far the plate /prism goes in i removed the arm and the glass prism fell on the floor,there is a very small screw that holds the prism in place that obviously was not tight enough,now ive put the glass prism in correctly but cannot get the guide scope to work at all ,how critical are the prism set up

why RG and B binned 2x2 thanks

hi guys the oag is on my ts100 quad,i used a st80 for guiding with my ed80 worked perfect

well just tried the asi178 c in the oag, on the moon for focus just before dusk as it was cloudy later but had no joy,but on saying that put the qhy5 ii back in and couldnt focus that on the moon either ,will have to wait for a clear night

thanks guys im using it with the ts 100 quad ,cheers

hi guys i know it may vary but typically what percentage do you do the following lrgb images for dso ie do you do twice as many l as rgb if you know what i mean thanks

tried using my oag with a qhy5 mono ccd tonight(which ive used quite often) but could not get enough steady signal to lock onto with phd2 ,moved the guider in and out,still same,now i know it was half moon ,but the sky was clear,but have never noticed this problem before so 1..does the moon effect the oag much 2.. does the oag need a heat strap 3.. would my asi178 be more sensitive thanks

any web page in particular neil for the clouds forecast?

would be nice for a windows based app

hi is this just an iphone app and not for the laptop?

thanks but soldering isnt a problem,loading the software might be though?

cheers sloz thats the one i ordered i think................https://www.ebay.co.uk/itm/Arduino-Nano-V3-0-ATMega328P-CH340G-Compatible-Board-USB-Cable-SOLDERED/282822682905?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

thanks appreciated

thanks parts on order

thanks where is the usb port on the DRV8825-HW203 Driver Board PCB sorry for all the questions so i just need the 1....DRV8825-HW203 Driver Board PCB , 2....the parts list then 3.....and would this motor be ok https://www.ebay.co.uk/itm/Nema-14-Stepper-Motor-0-9deg-400-steps-rev-0-4A-11Ncm-15-6oz-in-Bipolar-4-wires/121679235016?hash=item1c54a5c7c8:g:9BkAAOSwgQ9Vjiwg is that all i need cheers

is this usb controlled

thanks julian do they do it as a kiit with the components as well,had a look but very unsure what i need exactly thanks

wow do these units come prebuilt (pcb wise)

Yes gina and ide need something to contrôle it with as Well thanks

Thanks do you recomend Any inparticlar as Thérè seems to be loads especially on ebay cheers

hi just thinking about making a focus controller for my c8 edge but dont know where to start,can anyone suggest a motor /controller that maybe usb controlled

whats the notification module Rayd

thanks guys looking at the upgrade dont think i could justify the $79 thanks for your comments

just started a post on their forum thanks ray