Taff

Thanks everyone for your help lots of information on the page.Mark

Hi with the synscan hand set i only know the basics.Do anyone know where i can go on the net to read what the other topics are for on the hand set please Thanks.Mark

Hi' What type of app do you use on your mobile phone to line the Pole star to your mount Thanks.Mark

Thanks Jambouk' For your help i will check on the LED light to see if it is to bright,With the three very small allen screws to hold the Polar scope in place with three small grab screws which i have on youtube.Mark

Hi Jambouk' For your help what i was thinking is to place the small refractor piggyback on my reflector then try a weight to balance the scope.Mark

Hi' When i am looking through the Polar scope with the power and when the small light is on i can't see any thing through the Polar scope only a lot of specks.But when i turn the power off and then look through the Polar scope then i can see the Pole star in view but find it hard to see the small circle to place the Pole star.If i unscrew the Eyepiece to see if it is dirty inside the eyepiece, would i have to reline the small circle back to the Pole star by using software Thanks for reading.Mark

Thanks' For your help on the subject.Mark

Thanks Carole' When the scope is fitted to the mount i could try one weight.Then fit a filter wheel and the camera to the scope and see if the mount balance.Mark

Hi' With my EQ6 mount i would like to use a short tube refractor fitted to the mount.But i can't get the scope to balance on the mount with the weights' i have got.Can anyone help me on which weight i need so i can get the short scope to balance while on the mount Thanks.Mark

It will be nice to get back out when we are having these clear nights.

OK will do that is very kind of you to give me the bolt.Mark

Yes' please it look like the one i had when i first had the mount.How much do you want for the bolt?

Hi Thanks for the page i will give it a read.It does say about NEQ6 mount.Mark

Hi' Thanks for coming back,The back bolt have got a black handle and a red button which you push in when turning the bolt.Mark

Hi Freddie'Thanks for coming back yes the bolts are different lengths but the front bolt is shorter than the back bolt.Mark

Hi' Please i am looking for advice on the back handle back bolt on the altitude part of the mount.The bolt goes all the way in along the threaded hole and the mount stop at 50 degree but i need 51-- for the mount where i am.I don't know if i need a new back bolt or do i need the thread on the mount redone.Please can any one help me,I have done a photo of the threaded hole Thanks for reading.Mark

Yes Mike' The bolts are different lengths and they are new ones.The longer bolt with the handle is in the back of the mount.And the shorter bolt is in the front.Mark

If i tap the thread hole in the mount then use plumber tape around the bolt will that way work?.

Hi' Yesterday i removed the both bolts from my NEQ6 mount and moved the pointer up to 55 degree .Then placed the both bolts back into the mount ready to move the mount down to 51 degree.The front bolt was turning fine but with the back bolt with the handle when screwing it in the hole had some play with it when turning it.Even screwing the bolt right to the end of the thread to the mount then the looseness had stopped.But when it was time to tighten the front bolt it went past 51 degree where i went the mount to stop.The bolts are new and there are no bends on them.I don't go to any astronomy clubs' for help or any advice because of my illness, i only go on forums and on here Thanks.Mark

I'm trying to get close to my altitude so i can take images of the night sky with out having any star trails.A new problem have developed with the mount going to open a new page.Mark

Hi MBJ' Yes' the one with the handle and a red button which is the longest goes in the back of the mount and the shortest one goes into the front.When i took the old ones' out because the back bolt was bent.Mark.

Hi' I'm looking for some advice please.Over the night time over the weekend i was screwing in two new bolts for the altitude.The front bolt screwed in fine but with the back one with a handle on it won't go any higher than 50' degree.I need the mount to go to 51'degree but looking through the polar scope the altitude mount will not go any higher.Can any one help me out Thanks for reading.Mark

Hi' Thanks for the page i have saved it to have a look through Thanks.Mark