Jump to content



  • Content Count

  • Joined

  • Last visited

Community Reputation

269 Excellent


About themos

  • Rank
    Main Sequence

Profile Information

  • Gender
  • Location

Recent Profile Visitors

4,710 profile views
  1. Surprised that I noticed the Great Conjuction 11 years ago!
  2. Just be careful with the worm holder, I've had mine break in bits.
  3. Hello, If you have a camera and a laptop, you can use my PhotoPolarAlign method described here, it's been tested in Southern Hemisphere and can give Polar Alignment accurate to a few arcminutes in about 15 minutes.
  4. Sorry Olly, as I understand it it's not about saturating your chip with orange glow. The general rule for a single exposure is expose until your read noise is not the limiting factor. That happens earlier in the exposure for low-read-noise cameras (modern CMOS, for instance). So what other noise sources are there that we should think about? There's dark noise which is what you get even with the shutter closed. And there's shot noise, which is the uneven dribble of photons from light polluted "background" sky. The more light pollution there is, the more photons come from it and the associated
  5. I should add that the method I used in PPA also appears in SharpCap http://www.sharpcap.co.uk/sharpcap/features/polar-alignment so if you like the extra bells and whistles you might like to give that a try.
  6. I think it would be great for someone to add this, but I wouldn't be using it myself. Given that hardly anybody has a mount with motorised elevation/azimuth controls of the polar axis, the PPA process will always involve a human being iterating moves and closing in on the error. People with observatories can take their time and people that set up every night can use a piggy-back camera (even a compact camera will produce good enough stars in 10 seconds or so).
  7. I am sorry, that's not it! The first couple of images will fix the pixel position of the polar axis no matter what orientations you used. The requirement for the second image to be horizontal is to translate the x/y correction that is calculated (which is merely along the long side and short side of the sensor) to the left/right and up/down instructions needed for the person doing the mount correction.
  8. Hello Steve, I've avoided using the reflector at prime focus because 1) the image scale is a bit excessive for the purpose ,2) reflector images have the wrong parity which messes up the move instructions and 3) it's more tricky to know what horizontal is. Best way of making the mapping from arcminutes to screw turns is to solve images (with PPA!). I guess I would do the first couple to get the polar axis, then give a full turn to raise the polar axis and do an improvement solve, then note the new error (the Up/Down move instruction). Repeat for Left/Right. For this to work, you must
  9. It should be ok, I guess you will need to experiment. But you don't have to slew, you can just undo the RA clutch and swing the axis manually. Atsrotracs can't do that but your CG-5 should be able to do it.
  10. My Stellarium (0.17.0) says, when I click on Polaris, RA/Dec (on date): 2h55m07.03s/+89d20m23.7s. So that is nearly 40mins off the current NCP.
  11. Hello, I've added your ideas in the GitHub Issues. I am not sure when I will find time to add these but they are there in case anyone is tempted to implement them and do a pull request. Polaris was at ~44 minutes in J2000 but not now! PPA does adjust for the wandering of the Earth's axis (precession).
  12. Hello, After trying to make USB shutter control cable for an EOS 20D and failing (soldering skills and eyesight failing) I am asking the community to help me finish this. I already have an FTDI USB to TTL cable for the job and I have converted the 20D shutter control to 2.5mm female audio jack. The circuit needed is like this one except it will be driven by the GREEN/BLACK wires of the FTDI cable instead of the pin-7/pin-5 of the serial port in the diagram. If you can help, please get in touch. Themos
  13. They second one has just disappeared from the website!
  14. They've arrived! I got the one advertised as damaged case but I can't see any damage! I will give a further report later.
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.