Jump to content

SkySurveyBanner.jpg.21855908fce40597655603b6c9af720d.jpg

Odd Thomas

Members
  • Posts

    396
  • Joined

  • Last visited

Everything posted by Odd Thomas

  1. Stephenstargazer, I have a selection of diamond core drills and feel fairly confident I can get an accurate result..........famous last words! Well after an horrendous week of weather, I finally managed to get a bit more done. With the help of Mr Pythagoras I got the outline of the obsy marked on the ground, the corner holes dug and the 4 mid support holes dug. More concrete next.
  2. Callisto, That looks like a fine set up. I was contemplating doing the same as you have with the bolts sunk into the concrete, but I decided on drilling into the set concrete at a later date.
  3. Thanks for the votes of confidence, its nice to know other people are following, makes it all the more likely I'll actually get this project finished. We do feel lucky to live in such a nice area, but its taken a number of years to get the house refurbished. M40, I'm not planning to put any mains power in the observatory. Instead I'm going to use 12v battery power and attempt to modify a car alternator for wind power to charge it. (Stephenstargazer got it spot on) My brother lived in Florida for a number of years, and I know it has other benefits! Next job is to dig 6 smaller holes for the main support legs and get the concrete in, but that will be a few days away, I'm still aching!
  4. Next was the job I'd not been looking forward to most. Barrowing the concrete over the field, I figured this was preferable to taking the sand, cement, mixer and water over though. Took 8 barrow loads to fill the hole and another 2 1/2 to fill the pier pipe. I've not ached so much for years, but hopefully that will be the hardest job of the project.
  5. It was quite a struggle lifting it over the rebar as both me and my long suffering wife are somewhat vertically challenged! but after a few attempts and some choice words it was on and the rebar in the hole meshed nicely with the bolts on the pipe.
  6. Next job was to get it over the field and into position on the rebar. this was easier said than done as its a fair old weight, but a sack barrow came in handy.
  7. This is the 10" water pipe I'm going to use as a pier. They were renewing the water main near us and I asked if there was any spare offcuts, nice one. I fitted 3 bolts at 120 degrees in 2 positions to give a bit purchase in the concrete.
  8. Swoop1, I'll be mixing it myself. I've got a dumpy bag of sharp sand and half a dozen bags of cement left over from another job. Cheers for the good luck, I think I'm going to need it!
  9. Well I've finally run out of reasons why not too, and I've got round to starting the build of my little project. I've really enjoyed following other build threads on here so I'm going to post pics for anyone that may be interested in mine. Its not going to be a grand affair like some, but an exercise in using up some of the stuff that I've got laying around and clearing my garage so I can actually use it, and I'll be keeping the cost down as much as possible too. I had to obtain planning permission from our council as the build is visible from the road and we are in an AONB and an SSI. This is now through and they've given me guidance on where it needs to be. I would have preferred it nearer the centre of the field but it has to go next to the western wall. I've got pretty good 360 degree views with the house to the north and the moors to the south. I took advantage of the weather today and worked out the exact position of the pier and got the hole started. The standard 2 feet by 2 feet by 2 feet. I've also added rebar in the bottom of the hole and through where the pier will be. Next job will be the concrete which I'm not particularly looking forward to as its a fair old carry over the field. Apologies in advance if the pics and words don't tally, I'm not the best with computers.....
  10. malc-c, yes you can easily loose an hour or two doing that! If I go the route of a wooden floor, I may well land it on a dwarf wall. The field where its going is on sloping ground and can get a bit squelchy in the wet.
  11. All good info for a first time builder, thank you. Taking on board the above, I'm leaning towards a suspended wooden floor. We have the planning permission from the council through now, and I'm hoping to start the build around May. No doubt I'll have the usual questions for you all.....
  12. One for each. malc c, is the grey material insulation under the floor? DaveS, thats a good point. I hadn't thought of the cold issue, something to take into consideration definately.
  13. I know there are pros and cons for each, but I'm looking for input from those that are lucky enough to have their own observatory, regarding a wooden floating floor v a solid concrete slab. The pier will be isolated from either so this is not an issue. Have you laid a concrete floor and wished you'd made it wooden or vice versa? Access is reasonable for either so that is not an issue. any thoughts would be appreciated. Thank you.
  14. Here’s my take on a very heavy duty alt az mount.
  15. Chris, the objective is a rare, coated Jaegers (USA) item. Most of their offerings were uncoated. It's a beut!
  16. Fullerscopes used to sell a 6" f15 on the mark 4 so its well suited.
  17. I've thought the same thing myself. Thanks. I'm really pleased with the finish. Ha! I wasn't before I got it! Seriously though, I need an obsy for it. It's a bit of a struggle as the tripod is just so tall.
  18. Just realised, I've got pics of the scope and pics of the mount posted but non together, so here we go: Skylight 6" f15 on Fullerscopes Mk4 mount that I recently refurbed, and a couple with the Skylight 60mm f16 for scale. That's a full size table by the way.........
  19. Come on, don't be shy. We're all friends here.
  20. Thank you. No I'm not joking Chris. It's on a Fullerscopes Mk1V deluxe. There is a picture of it somewhere on the board,
  21. Here's 3 of my Skylight family... Little brother 60mm f16, Big brother 4" f13, And cousin 102mm Apo. triplet, which is quite simply (in my opinion) the nicest scope I have ever seen never mind owned, I love it! Big daddy 6" f15 is shy and hiding in the shed.....
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.