-
Posts
9 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by bencevokoszt
-
-
2 minutes ago, matt_baker said:
You did? Maybe you need an even larger magnification then to correct the sampling.
Also I meant the after result of the Lunar picture aha but it's okay
Okay, thank you for your help
-
1 minute ago, matt_baker said:
Basically because you're so undersampled with the camera, it causes the pixels to become very blocky. Drizzling sorts this and smooths the final product.
If you don't want to drizzle everytime I would use a 2-3x barlow lens to correct the sampling, since the camera uses large pixels
What does the after product look like also?
I use 2xBarlow for this image.
-
1 minute ago, matt_baker said:
No problem, what setup are you using?
Telescope: 150/750
Mount: Synscan EQ5 pro goto
Camera: T7C or Nikon D5300
-
11 minutes ago, matt_baker said:
Try drizzling it in AS!3 maybe and see what that turns out as or it could be that it's not debayered properly
Worked, thank you :3
-
1 minute ago, matt_baker said:
Try drizzling it in AS!3 maybe and see what that turns out as or it could be that it's not debayered properly
Okay, I'll try it
-
4 minutes ago, matt_baker said:
Did it look like this before you did all the noise reduction and unsharp masking?
Yes, that's what he looked like.
-
4 minutes ago, Cornelius Varley said:
Was the image taken with a colour camera ?
Yes, with T7C
-
Handcontroller V4 Firmware update error
in Discussions - Software
Posted · Edited by bencevokoszt
I want to update the hand controller, but it says this. I have RS323 usb converer. I use it with it but stops at 24%