xs4allan

You can put an adapter extender/block between the dovetail and the scope. Or use another dovetail.

I was thinking of buying this scope and wondered about this too. Does the focuser adapter (grey round thing) fit the focuser on the scope?

If you have trouble with NINA interrupting PHD2 calibration when using a sequence or whatever schedule.  Be careful you don't have your NINA guiding start timeout too LOW in combination with Guiding start retry. NINA will think PHD2 is not guiding when it is calibrating if this timeout is set too low. Subsequently it will tell PHD2 to RESTART guiding. Causing it never to start guiding because PHD2 will first start calibrating.

I dont know if this fixes the issue for some people but my sequences are looping good with this in mind.

Just got the Evostar 72ED and also have an ASI224MC. Did you manage to get it to focus? Would like to know before I buy any extension tubes/FF.

Ordered this at FLO to fit with SCT to T2 adapter https://www.firstlightoptics.com/adapters/astro-essentials-sct-t-adapter-39mm.html

and Baader T2 eyepiece clamp https://www.firstlightoptics.com/adapters/baader-ultrashort-1-t-2-eyepiece-clamp.html

Fits perfectly!

My first picture with my beginner telescope. Heritage 130p Telescope with Huawei Mate 20 and a Celestron phone adapter.