Jump to content



  • Content Count

  • Joined

  • Last visited

  • Days Won


Uranium235 last won the day on November 14 2017

Uranium235 had the most liked content!

Community Reputation

7,225 Excellent

About Uranium235

  • Rank
    Main Sequence

Profile Information

  • Gender
    Not Telling
  • Location
    Worcestershire, UK

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Had to get a bit sweaty over this one, lots of star control required. Also, in OIII there is a noticeable halo on the bright star once heavily stretched (nothing can be done about that) but I modelled the backround for that area and subtracted (in Ps) for an overall flatter OIII layer. Tried to retain some decent star colour while I was there. I know theres a fair bit of Ha lurking, but in an effort to keep the overall noise down I'll be slightly more restrained. The image should tolerate some pixel peeping too
  2. Looks consistent with tilt. A fully loaded imaging train acts as a lever under gravity. So any movement in the focuser or imaging train would be exposed. But, I take CCD inspector with a pinch of salt. You would need to take multiple shots of different parts of the sky (but not go past the meridian) to see if the readings are consistent.
  3. DIfficult to see since you havent poseted a full screen shot. But from what I can see it is tilted to one side a little. Even my Star 71 needed its focuser (which was also R&P) tweaking out of the box, there are two bolts on top of the focuser- you may need to nip those up a little (and I mean little). You can check for focuser movenent by racking it out a bit - then basically give it a tug in all directions. If you detect any movement/wobble (no matter how small), then it needs to be tightened up. Still needs to be in focus though to make the correct assessment, before you
  4. You only need to adiust the flattener if you have introduced a filter into the imaging train or had the camera modified (filter removed). Making the spacing longer will only make it worse, it needs to be shorter. Or in focus. The spacing as detailed by FLO is 11.4mm, however that is the recommended distance, and not every camera/filter combination is the same, so you may need to tweak that by a mm or 2. But, only from a properly (centrally) focused image can you make a proper assessment and decide which way to go (longer or shorter). When focusing, zoom right in to the diffracti
  5. Ok, looking at that image... it is out of focus, but it does display corner characteristics (the distortion is of equal magnitude in all corners) that tell you either: 1) The FF/FR spacing is too long or 2) The optics cannot provide a (perfectly) flat field across APS-C or larger. But, get the image in proper focus first - that might correct a lot of the issues.
  6. Looks like tilt in the imaging train, being as it gets progressively worse from left to right. However, there is a tracking error in there too. 1) Check for saggy or loose connections. 2) Take shorter subs to get an image free from tracking issues (or get guiding) - that will allow you to correctly judge where the tilt is. 3) Inspect the corners of the test sub, make adjustment as required 4) Rinse and repeat until satisfied
  7. Top tip, point it at something big first... like the Moon, you cant miss it...lol. Get it roughly in focus (make a note of its position), then swing round to a planet or star to fine focus.
  8. I can relate to this.... I find it quite soothing to be out, and concetrating on something other than earthly matters.
  9. Cheers...lol... just checkin ive still got the skillz
  10. If you have Ps, the stars could be sorted out using layer masks. Easy... cha cha cha
  11. The sky was just too good to say "no" last night, albeit quite cold! So, I set up for shot at this one and took as much data as possible before it disappeared behind the neighbours house (my southern view is quite restricted, 2.5 hours at most). Decided on the 130pds as its in a good, settled place at the moment and performing (as usual) waaaay beyond its price tag. 14x600s (Ha) 2x2bin (3.4" p/p) 130pds, NEQ6, QSI683 Thanks for looking!
  12. I'll kick it off as usual, just a few from the Askar lens and 130pds
  13. Its that time again! Please use this thread to showcase your best images captured during 2020 (we've all spent a lot of time at home during 2020, so I'm expecting some good stuff). Just one post per member but you can include up to 5 images if you want. The thread is for all imagers, both novices and advanced. Please keep details to a minimum - scope and camera possibly along with a few comments if required. The thread needs to be packed with images so please don't respond to the postings. The previous years showcase thread(s) can be found here: https://stargazersloun
  14. Out and about for a couple of hours this evening 14x600 Ha
  15. Guiding tonite!

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.