Jump to content

SkySurveyBanner.jpg.21855908fce40597655603b6c9af720d.jpg

Daz69

Members
  • Posts

    303
  • Joined

  • Last visited

Posts posted by Daz69

  1. Hi Gina. 

    Where would an absolute newb start with these Raspberry Pi's? This all looks extremely technical and scares the jeepers out of me even wanting to begin to learn how these things work.

    I see so many people use these for all sorts of projects, so they are clearly versatile devices, and I would love to bring one into my projects. I'm just feeling like its all way above my head.

  2. A nice tidy build, well done. I'm starting my distribution box build today. Delivery from China is a right PITA isn't it. Sometimes you feel it's worth spending a few quid more just to get it from the UK to speed things up. I waited ages for my PWM's from China too.

    Where did you find the fuse holders?

    Daz

    • Like 1
  3. Thanks Dave, much appreciated.

    My dimmers finally arrived today from China, via Saturn I think! I believe I have everything I need now, so construction will begin probably on Sunday when I'm off. I just stripped down the dimmers and boy is that a small PCB, which is great as it won't take up any room at all, very happy!

  4. 21 hours ago, Davey-T said:

    I used one of these and chucked the AC adapter innards and fitted the buck converter in the case.

    Dave

    http://www.ebay.co.uk/itm/AC-Power-Adapter-DC-Coupler-for-Canon-ACK-E6-5D-Mark-III-7D-6D-LP-E6-DR-E6-/291849383609?hash=item43f3942eb9:g:32YAAOSwU9xUSCBO

    Canon-power-supply.png

     

    I like this idea very much. My 2 converters arrived today, and boy are they small! I'm happy to fit the bucks inside my main box as I'm also doing the crowbar circuit to protect the camera as well, and perhaps I'll just make a straight-through wire from my box to the camera using this battery dummy. As stated above, does this dummy give you the error message described? 

    Many thanks!

  5. 27 minutes ago, Gina said:

    I soldered wires directly onto the battery PCB.

    Hi Gina. Thought about that but want to still be able to use it on days out etc, so it needs to be removable. 

    3 minutes ago, Alien 13 said:

    Sharp craft knife or similar to break the seal around the edge.

    Alan

    Around the manufacturers joint? Understood.

  6. One further question at this stage, Sorry I have asked a lot lately, but with the power for the camera, will I need one of those dummy batteries or do I use the small USB socket? I cannot find my manual, think my son has borrowed it when he used my camera for his media project. 

  7. 4 minutes ago, nightfisher said:

    Just a thought, a 2S lipo for radio control models is 7.4 v dc, fully charged they tend to put out 8.4

    I have loads of those for my RC planes, right up to 6s 5000mah! 

    The camera will be powered by my home made 12v power supply. It will have 2x 12v RCA sockets, 9v RCA for a rear fan, 2x adjustable PWM channels for heater bands, 2x adjustable voltage sockets using buck converters and LED displays (one will be for my camera which will have voltage protection as mentioned above), 5v RCA sockets and 2 cigarette sockets.  

    Initially I will only use a 9Ah deep cycle battery to fit the project box that I have, more of a trial really, but if I find a larger project box then this will house 2 of them, and a PSU for home use, that I took out of an old PC. I've been looking at those heavy duty battery boxes for leisure batteries perhaps. 

    I'll never use all of these sockets at the same time, well at the mo. I'll likely only use 2x heater bands for EP and secondary, fan and camera. I might include 2x USB sockets for tablet and phone, or just use one of those cigarette socket USB plugs. 

    My end vision is to have a small observatory where I can use this set up. Mrs Daz has giving me permission to build one. She mentioned it once in a conversation. That's permission, isn't it? :D 

  8. I agree. I tried searching but Canon specs aren't great, and other Google searches threw up anything between 6.5v and 8.5v which seemed nothing more than guesses, so originally I went with the 7.4v shown on the standard battery pack. 

    I know that the camera is too heavy for the focus tube on my scope so my intention was to just use it with my 300ml lens on the tube ring mount. 

  9. 14 hours ago, Xplode said:

    Like Alan wrote The Battery grip on these cameras make it possible to use 6xAA batteries @ 9v so it's totally safe to run at 9v.

    I used 9v on my 6D and your 60D should work ok too since it uses the same battery.

     

     

    I did actually run it accidentaly on 12v for months too, i had several battery dummies and thought i used one with a voltage regulator on it...but nope! 

    I see that the recommended external battery pack is exactly as you say, 9v, so I have gone for a circuit that will shut down at 9.1v as shown in the above link (now fixed!). Having had this bought for me a couple of years ago by Mrs Daz as a "get well" present, and then finding the receipt (she also got me 2 extra lenses 18-135mm and 70-300mm), I want to protect it as much as possible, as I know I won't be getting another one in a hurry :D 

    I went and bought the components from Maplin, luckily I got a nice chap who knew what I wanted to build, as sometimes it can be a bit of a gamble with their staff. Hoping that all of my other bits n' bobs will turn up before Sunday as I have 5 days off and want to get the whole project built. 

    Thanks again.

    • Like 1
  10. Moving on, @Davey-T has given me a good idea in incorporating a seemingly obvious safety net of a so-called crowbar circuit, ensuring the voltage doesn't suddenly spike or rise should the buck converter fail, and saving my camera. Here is a 9.1v crowbar circuit diagram, but I'm stuck (again) on some of the values.

    I read that the circuit should be around 1v more than the operating voltage requires, so going with what others have said so far, this 9.1v circuit should fit the bill nicely. My issues are with the Schottky diode and the thyristor values. Also, would the 0.25a (250mA) fuse be enough?

    Here is a link to the page where I found it: https://en.wikibooks.org/wiki/Practical_Electronics/Crowbar_circuit

    Thanks again guys n' gals.

  11. 1 minute ago, Alien 13 said:

    If you have a Canon battery grip it comes with an adapter to use 6 AA cells which equates to 9 V so I have taken that to be the upper supply limit, more voltage does mean that the on board regulators in the camera get warmer though.

    Alan

    I don't, just have the standard battery. It's all good info so thanks for taking the time to assist me.

    • Like 1
  12. 1 hour ago, 101nut said:

    You can use a 7808 and an output diode to drop 0.6v and give 7.4V output over a fairly good current range ... how accurate has it got to be bearing in mind the camera probably has power regulators on board to cope with the battery voltage varying?

    AndyG

    I presumed 7.4v as that's what's in the specs, but it seems that is not the case. I ordered a couple of the buck converters to see how good they are. I have some small red LED voltage displays that I'll use on the outside of the box, but I'll check the outputs firstly with my multimeter. 

    Thanks for all of your replies, really helpful, especially as I'd never seen these converters!

    • Like 1
  13. My first capacitor before the voltage regulator will be a  100uF-25V electrolytic, the second one after the reg will be a  10uF-25V electrolytic, and the third one before the output sockets will be a  100nF-63V ceramic or polyester capacitor. Was also going to fit a diode before everything tor reverse polarity protection. I can get a 7808, but have some 09's in the workshop. 

    Hi Gina, what sort of range would the voltage be likely to go from and to? 

  14. Afternoon all.

    I'm stuck. I need to get 7.4v output from 12v supply to power my Canon 60D. I have a 7809 voltage regulator and the required capacitors, but this will only get my to a steady 9v. I know I'll need a resistor to get me close to 7.4v, but which one? My next question, well maybe just a confirmation, will it need to go after the last capacitor,  and before the output socket?

    Thanks peeps

    Daz

  15. Thank you for allowing me to be part of your amazing forum. I've only been a member for a few days now after receiving my first ever telescope for Christmas from Mrs Daz, but the warm greetings, help and advice just in these few days has been brilliant and to be truthful, not as I expected.

    I'm a member of quite a few forums due to my "quite a few" hobbies, but this so far is the best forum. 

    Keep up the good work! :)

    • Like 7
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.