-
Posts
226 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Blogs
Posts posted by Pan Euro
-
-
That's impressive printing Gina.
- 2
-
Gina, looking forward to this project.
Ed
- 1
-
Very interesting, thank you for sharing.
-
Halfords are selling 6 tiles 120x180cm for £10 at the moment. Maplins are £12.99 for the same thing
-
20mm sounds good to me.
- 1
-
Gina, how long is the yellow overhang ?
Ed
-
That scope looks awesome.
- 1
-
That looks really impressive.
- 1
-
Really, really impressive. As said before superbly implemented.
-
Those vanes look very delicate.
-
Have you tried moving the attachment point from the middle of the window frame to near the top it may make it easier to move. Just a thought.
Moving to Linux - What works and alternatives
in Discussions - Software
Posted
After reading the posts on here about 10 times to make sure I had some idea of what I needed to do I took the plunge again into Linux. Only, this time I stuck at it. I have loaded Linux Mint 18.2 Sonya Cinnamon edition on a fresh hard drive, I had serious problems with error messages on a couple of old but working drives, and then loaded ;
Kstars
Skychart (CDC)
IndiStarter
tried Skychart this morning and it appeared to connect first time to my Meade LX200 GPS. However, I had to go out as I needed a ride on the motorcycle to wipe the cobwebs away. Came back and opened the Obsys which is at the far end of the garden and is connected via Cat 5 and 6 cables via various converters.
I used another computer (Win10) to access my internal and an external webcam set up and connected again. Well happy ? the scope does all it is supposed to do. What I need now is some Linux webcam software that will run over cat cables so I can keep it all on one machine.
i have also purchased a Raspberry Pi3 as I would like to run my AP cameras from this and connect it to my network. That is my next challenge. ?