redtail

http://www.scopefocus.info/filterwheel

can you give me a link to David Davies's process please.

I have a ts65q and agree with the above.It is my best scope.

I just bought a cem60 but had to buy from Germany as none in the uk.

Drill and tap it.

https://wix443.wixsite.com/polemaster-emulator

Hi i have the same rain sensor and it does not work unless you have a plate etc for rain to run off onto the sensor as it needs some pollutant to activate. https://www.rapidonline.com/Kemo-M152-12V-Rain-Detector-Sensor-Relay-Module-Pre-Assembled-55-2385?IncVat=1&pdg=pla-294357559827:kwd-294357559827:cmp-757438067:adg-44804851896:crv-207912323492:pid-55-2385:dev-c&gclid=EAIaIQobChMI5LO9wr2U5AIVQ7DtCh3P-gLzEAQYBCABEgKE2fD_BwE read the bottom line of text.

http://www.scopefocus.info/home/rotator

Nope 2.09 is ascom pad eqmod is 2.00k.

I use w10 with aaf2 and get problems but if i use it as poth hub in sgpro no problems,

Hi Paul can you give us details on your build...code etc.Thanks.Very nice by the way.

I use these motors on all the focusers i have built for friends.

I have been using aaf2 with sgpro and it works seamlessly,the autofocus routine is a joy to use and i have it set to refocus every degree change.Try connecting as poth hub.

before fitting

Hi Dave,i built the focuser for shand and this is how it is mounted.

Dave i think you have misunderstood my post,this is the solution to anyone having trouble with the aaf2 and sgpro ie select poth hub in sgpro for the focuser and it will work fine.

I have been having the same problem with the focuser in sgpro,also the tem drops out when the focuser moves and does not come back. I switched to poth hub instead of aaf2 and it solved the problem.

Can you tell me where you got the wheelchair seat lifter.

Wow,now i am on the search for a riser.

Hi golyo 73 any chance of getting the sketch and wiring mods for the modded focuser.Thanks.

Hi has anyone fitted a rotary encoder for manual focus,and if so how?

Wow these mcclellan steppers are power houses

I have made another focuser with one of these steppers http://www.mclennan.co.uk/product/p542-geared-stepper-motorthey are available from rs components and are very very strong.In fact you would be pushed to to stop it.same software and driver board as the original set up.The stepper is the exactly the same stepper used in the lakeside focuser but works a lot faster than the lakeside.This maybe due to the arduino.well chuffed

If i wish to use a bipolar 4 wire stepper what changes would i have to make?

Hi has anyone managed to get the program to show the focuser movement.I noticed golyo73 has it showing movement in APT.Thanks