redtail

Hi i have the same rain sensor and it does not work unless you have a plate etc for rain to run off onto the sensor as it needs some pollutant to activate. https://www.rapidonline.com/Kemo-M152-12V-Rain-Detector-Sensor-Relay-Module-Pre-Assembled-55-2385?IncVat=1&pdg=pla-294357559827:kwd-294357559827:cmp-757438067:adg-44804851896:crv-207912323492:pid-55-2385:dev-c&gclid=EAIaIQobChMI5LO9wr2U5AIVQ7DtCh3P-gLzEAQYBCABEgKE2fD_BwE read the bottom line of text.

http://www.scopefocus.info/home/rotator

Nope 2.09 is ascom pad eqmod is 2.00k.

Three internal grub screws.

Yes it is in two parts and one part is left in the mount when the camera tube is removed.

It was machined on a lathe.

I use these .They are excellent.https://uk.rs-online.com/web/p/stepper-motors/3514625/

Hi have you shared this project anywhere.

Or you could use direct drive as on my other scope.If i were you i would connect to the rough focus if using direct drive.

This is mine.

get a strip aluminium and bend to a right angle then drill out the fittings

felopaul driver and usb x440 connected in sgpro .....easy

You should use this relay board as its driver is ascom and works well in sgpro .....USB-X440 http://www.felopaul.com/ascomRool.htm

you need to tick the use serial com

My take on mounting the qhy 5