iwannabswiss

I have a moonlight for my sn. Could you adjust the tension a little?

Like mentioned you would have to bore out on size. I had a 5mm couple laying around, I used a dremel collet to fill the gap.

Looks good silos. I just finished putting my in the container, now just need to decide either direct drive or belt. Currently have it on direct drive but we'll see when it comes time to take some pictures.[emoji4]

I hate working, it takes away from the important things in life like finishing a project. Finally got the direct drive mounted and working.  Now I just need to powder coat the holder and make a decision, do I want to contain everything in the holder or just run a wire down the OTA to a electric base station with everything else.  I'm hoping to save as much on weight as possible.

Welcome to the club blackdragon72.  Besides going with the Uno instead of the nano, did you go with the stepper motor I showed you?  You can use the sketch provided here and make it work on the Uno with no issues, but use the same wiring diagram.

I live in the states but had a chance to move to Switzerland for a year. Had an absolute blast and miss the ways of life. Wish I could move back, I enjoyed the easy access to different counties, cultures, and languages.

Awesome guys, I'm in business! Thanks for the help. I remember seeing something about those libraries in my arduino book but it never dawned on me. Guess that's why you shouldn't work on something late at night, lol.

I had the older version working just fine.  I followed the directions and deleted everything then started to attempt to upload the latest version, I got the AAF2 programs on.   The issue I'm running into is trying to upload the sketch to my nano without the temp sensor.  Any spot that has the temp in it gives me an error the only way to bypass it is to add the //.