Jump to content

Narrowband

Thalestris24

Members
  • Posts

    7,194
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Thalestris24

  1. Hiya Oh dear, I'm 'cross-threading' myself here... Started a separate one asking about the TS APO 90mm... As mentioned at various places, I need something I can attach a filter wheel and dslr to... This is a headache with most flatteners/reducers. The TA APO 90 / Revelation has the advantage of being useable for imaging without a reducer though still needs a flattener of course. The Zenithstar 71 is also fast enough for doing that but is a little short. Still, I'll put it on the list! Do you still have the Ascension 80? I saw a couple of images you did with it - looked fine to me! Thanks Louise
  2. Hiya I'm not sure how transportable it would be and I know fast newts are critical to collimate. Plus I'd probably run into the backfocus problem with any newt. A short frac fits the bill better even though the cost is much higher. It's frustrating that I could buy a 130pds for less than the cost of a field flattener but that's the way the scope cookie crumbles! Thanks Louise
  3. Hi It's a little short and only has 35mm focuser travel and seems a bit 'non-standard'? It's a bit pricey... The Equinox is a bit pricey as well really, especially, as you say, with the flattener (+£170). Sigh. I've been pointed in the direction of the Explore Scientific triplet ED 80 Essential which is less than £500 incl shipping and has good reviews. There must be a crossover where there's a point that it doesn't make economical sense to pay more for a scope that's to be used with a dslr... The intention is to image with narrowband as I already have the filters but osc and LRGB are still an additional option. I might find that I have less lp looking to the west, away from the city, in which case non-narrowband would be much better than I get from my living room! It's like a lot of things - don't know until I try! I might simply postpone getting another scope and simply try out with my ST-80. It's pretty rubbish for imaging but will give me an idea what al fresco imaging would be like and the kind of images I could get looking West. More deep thought. Anyway, I still have to get a laptop and some other bits first... It all adds up! Thanks Louise
  4. Hiya Yeah, I'm aware the two scopes are the same in that respect but I don't want to disturb the 150pds setup. It sits there quite happily, all focused and ready to go - should there be a break in the clouds! Besides, what would be the point of doing it? I already have a modded 1100d I could use and using a colour camera for narrowband is inefficient anyway. I'm looking at other refractors like the Equinox 80. It's a bit pricey but cheap compared to true APOs and easily portable. I can get a flattener with a long back focus which would give me plenty of room for a filter wheel. Thanks for your input though - much appreciated Louise
  5. Hiya Um, it's not really about pressing stuff into service, it's more the need to have a portable combo I can easily take outside (I live in a 2nd floor flat with no lift...) and that's quick and easy to setup - and on a tight budget, of course! The 150pds would just be too difficult for little me to transport. A shortish refractor seems to fit the bill.. It would be a shame to not use the mono 1100d. In any case, with the local lp, narrowband seems the way to go. A filter drawyer might do - how much focus travel actually is there with the Evostar ED80? Maybe an alternate ED80 make/model would allow it? There must be a way!! I know a mono ccd would be the best solution but I just can't afford one Louise
  6. Thinking about it, I suppose the focuser travel is lost by using a focal reducer... I only need 25-30mm for the filter wheel. Maybe an alternate refractor? An achromat might do. I suppose I could swap speed for space. Oh well, back to deep thought... Louise
  7. Hiya Luis seems to just use a single filter (Ha) and blends with colour images from an undebayered camera. He has some very nice images on his Flickr page. I was thinking about having the fw ahead of the Evostar 80ED ff - there must be plenty of travel room since, without the diagonal, you'd have an extension tube attached? However I don't know if there'd be a problem from an optical point of view with filters further from the sensor? Thanks Louise
  8. Hiya Oh, I should have said... Yes, with a debayered 1100d. Hmm... I'd forgotten about the 80ED slowness. Can't win, sigh. Do you think it might be feasible to attach a filter wheel in front of the ff? My qhy8l is permanently attached to my 150pds which is staying indoors. I'm trying to put together a rig to use outside and which I'd be transporting to a location which is about 10mins walk away. Louise
  9. Hiya Thanks though I really wanted to know if one is better than the other in terms of use without a cc/ff since I want to be able to use a filter wheel with a dslr... Maybe there's no difference? Cheers Louise
  10. Hiya Yeah but can't have cc+fw+dslr as far as I've been able to ascertain I don't suppose anyone has had experience of 130pds and 80ED - would be good to have a comparison re: distortions. Louise Louise
  11. Hi I'm still thinking about getting one of these... I guess it needs a coma corrector? I'd really like to be able to use a filter wheel and a dslr. I'm wondering if the coma on the 130pds is worse (or better) than the field curvature on the Evostar 80ED - anyone know? Cheers Louise
  12. Hi again Can you confirm if you have reducing coma corrector? If it's a SW 0.9 one then your fov will then be 1.41 x 0.94. So 20% bigger will be 1.41 x 1.2 -> 1.69, say 1.7 and 20% smaller will be 0.94 x .8 -> 0.75. So those numbers will determine the index files you need and you can put 1.7 into scale maximum. Hope that works now! Phew! Louise
  13. Hi again Actually, your fov calculation is wrong - for a explorer 200 and a 1000d, it should be 1.27 x 0.85, so 20% larger should be 1.27 x 1.2 -> 1.83 deg, say 1.9 deg. 20% smaller should be 0.85 x .8 -> 0.68 deg so you need to use those values to determine which index files you need. Then you just need to put 1.9 into scale maximum. I suddenly realised your calcs were wrong when I was looking at my own for a 150pds and 1100d... Sorry, wasn't thinking before, d'uh. Louise Oops! Sorry just realised you have a coma corrector - if that's a reducer also, you'll have to multiply the values to allow for that.
  14. Hi Assuming your fov calculations are correct, the scale maximum value should be 0.282 degrees - say 0.3 in round numbers I don't think you really need to specify the scale min value (can be 0) or the -H and -L parameters. Hth Louise
  15. Wow! Need my sunglasses on to view that one!
  16. Hi Hope you don't mind me butting in again. But FWIW mine doesn't move in RA as easy as it does in DEC with clutches loosened, so it takes more effort to unbalance it in RA. However, it's still possible for me to move the mount in RA (with no scope) using one hand (I'm only little!) and the rotation is smooth, if a little 'heavy' feeling. I can move it in RA with the scope attached using just one finger. Also tracks fine. I think it's really hard to convey what these things are like, or what they should be like, just in text and pictures. Maybe video is the answer to sharing such info! When I next rebalance mine I'll try and make a video of it Louise
  17. Hi I had similar concerns however I just think it's a characteristic of the mount. If it slews quite happily and tracks and guides ok then maybe just leave well alone and be happy. Louise
  18. Hi Adam In principal you can but it's not very practical I'm afraid. They are really for use with monochrome ccd's with filter wheels. You might be able to attach one filter at a time but that would be very fiddly. Even then you'd really need dark skies as you'd require long exposures - the narrowband filters seriously cut the amount of light reaching the sensor. Um, as this is a pinned topic you may not get more replies as members don't tend to scour them for new posts. Better to create a new topic Louise
  19. Hmm... a bino microscope would be much better, I'm sure!
  20. Hi Gina Something like this might be handy! http://www.amazon.co.uk/Bresser-Microscope-5802000-Biolux-ICD/dp/B0017J7NW6/ref=sr_1_2?ie=UTF8&qid=1400262882&sr=8-2&keywords=binocular+microscope Dunno how you manage without a microscope! Must be very hard to see detail! Louise
  21. Hmm.. it's a bit like a politician or a salesman telling people what they want to hear... For not much more than the price of a 60da you can buy a ccd with a higher QE. If the 60da was a mono with microlenses it might be worth it! Louise
  22. Maybe not - they probably have a very integrated production line. Of course, there wouldn't be a mass demand for them anyway. Oh well. Louise
  23. Hi Yeah - one day! I really don't have time to do anything much with it at the moment. It will almost certainly have imperfections though. It's a darn shame Canon don't produce some of them without CFAs in the first place! Louise
  24. Hi guys Got my debayered 1100d today - have posted a quick daytime comparison in the 'cameras' section if anyone is interested. Cheers Louise
  25. Awesome! I've yet to even image a galaxy at all so have to hand it to you. 41 hours - that's true dedication! Thanks for sharing it with us. Louise
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.