Jump to content

30 secs banner.jpg


  • Content Count

  • Joined

  • Last visited

Everything posted by Andrew

  1. Thanks for your help. I have looked at your guide Moonshane. I see where I have been going wrong (maybe). Astrobaby's guide suggests adjusting the secondary so that the reflection of the primary is centered in the secondary, as judged using the mirror clips on the primary and getting these aligned equally around the edge of the secondary. There is no mention of adjusting the secondary to move the donut in relation to the Cheshire cross hairs. When I centre my secondary to fit Astrobaby's criteria the donut does not sit perfectly under the cross hairs (as recommended in Moonshane's guide). It d
  2. Unfortunately, I don't have a laser (I last used it years ago and it died). I was going to buy a new one but decided to opt for the Cheshire instead!
  3. I wonder if anyone could help me with some basic collimation issues? I have not been out with my scope for a long time for various reasons, but have a new enthusiasm for it and decided I ought to collimate my telescope since I have not done this for a while. I had previously used a laser but was never really convinced by this method due to uncertainty about whether the laser was properly aligned. Consequently, I decided to have a go with a Cheshire, and bought a very nice one from FLO. I read Astrobaby’s guide to collimation, which was very helpful since I haven't done this for several years,
  4. ok - thanks. There is no mention of this on the site I got it from, but you may have just saved me £40!
  5. I just ordered a Skywatcher 200PDS OTA but forget to get tube rings! The Skywatcher site says the tube diameter is 240 mm, but the nearest size skywatcher tube rings (listed on the FLO site) have an internal diameter of 235 mm - ie too small. Surely, this is the right size? Can anyone tell me before I go ahead and order? Thanks
  6. I have had a go with DSS Live and Astrovideo with my Watec. Both work very well. However, although it's possible to stack images 'on the fly' I do feel like I'm spending too much time fiddling with settings and changing directory etc so I spend less time than I'd like actually looking at the image on screen! I also tried out a couple of monitors (both CRT according to the back of them - they were certainly large enough!) but so far my lap top provides by far the brightest image. Not sure why that is because I thought a CRT was meant to be better.
  7. Very nice sketch. Looks like you spent a fair bit of time getting the stars in the right places.
  8. I'm not sure I'd have the patience for 250 frames! Still, even a single frame shows more than I can see of M1 visually with my 12" dob.
  9. Thanks for the comments/suggestions. I'm leaning towards the 8" f5.
  10. I recently got a Watec camera and have been trying it out using a 4.5" f4 Newtonian (I've attached a couple of images below). I plan to get a larger scope to use with it and I'm wondering what to go for. So far I'm considering either an 8" f4 imaging Newtonian or the 8" f5 Skywatcher Newtonian with the shorter tube for imaging that will allow me to use a focal reducer and get to about f3.3. I'm leaning towards the f5 scope because it will be better for visual work and at f3.3 with the reducer it will give brighter images using the Watec. If anyone has any thoughts on these or alternative scope
  11. Nice images - I particularly like M1. Are these single 10 sec integrations or stacked images?
  12. Had another go with the watec a couple of nights ago. Saw several more objects using the 4.5" Newt + Watec that I can't see with a 12" Newt alone (several faint galaxies, bubble nebula, spiral arms in M81 - in the 12" I can only see the core). Tried to get the 12" on the NEQ6 but gave up because it's just too unwieldy. Could probably do it with some sort of frame to hold the scope while I lower it on! Either that or it's a two person job. Not really a viable option for everyday use. Think I may get an 8" Newt, which I should be able to put on the mount easily enough. Also started playing aroun
  13. I heard the cathode ray tube gives the best (brightest) results, but my grasp of electronics is not great so I'm not sure what's needed in terms of cables. Ultimately I hope to compare that vs progressive stacking of images on the laptop while viewing using AstroVideo. At the moment I'm still getting to grips with polar alignment and using a driven mount!
  14. I hope to get the 12" on the mount soon. If it proves too unwieldy I may get an 8" Newtonian instead. I'm using a laptop at the moment. I was thinking of looking for an old B&W portable TV (I heard these were good) although the Watec instructions suggest they can't be plugged straight into a TV (I'm not sure if I've misunderstood this). I've also been thinking about using it with the AstroVideo software (in order to stack images on the fly). The Astrovideo site suggests this software only works with Windows XP or earlier, or with 32 bit OS, but in fact it will work with Windows 7 64 bit if
  15. After years of struggling to see faint objects I finally decided to have a go at video astronomy and bought a Watec a couple of weeks ago. I've tried it out a few times, but tonight was the first time I put it on the tracking mount. It really is pretty impressive. At the moment I'm using it with a small (4.5") f4 Newtonian. Even at quite short integrations (1-5 seconds) objects that can't be seen from my site in the scope alone show up easily (e.g. M110 & M76). Tonight the pick of the bunch was NGC891. I've never managed to see this even in my 12" scope, but with the Watec in the 4.5" it w
  16. I particularly like your NGC663. That's one of my favourite clusters in Cass for visual obs.
  17. Don't worry - it's all interesting to me since I know nothing about either the cameras or mounts yet (up to now I've been strictly a dob user)
  18. I'm also in the SW and the sky was horrible here (as it is tonight) despite being clear. I guess there is a lot of dust interacting with the light pollution. Nice photo though. One of the few highlights for me last night was getting my first sight of the GRS. Also, the distinct feature on the upper band was also visible. Very helpful to compare what I saw with your photo!
  19. Thanks everyone - I will take a look at the Samsung and the Lodestar C. Do those of you with a watec use a guide camera as well or is that not necessary?
  20. Andrew


    I took a look at M76 tonight. Very nice and bright, especially with the UHC/OIII. Slight hint of the dumbell shape, especially on one side.
  21. Thanks Riklaunim (very nice web site by the way). Sorry if I have misinterpreted what you said - but does this mean that on bright DSO you would expect a DS camera to give less noisy and more detailed images than a Watec for similar exposure times, while on very faint objects the Watec would require shorter exposure times than a DS camera to be able to see the object at all?
  22. Thanks Graham. I'll take a look at them.
  23. I’m thinking of getting into video astronomy to assist my observing (and combat light pollution) and I’d be grateful if anyone can advise me... I’m trying to choose between getting a Watec 120n+ or a CCD camera (not really video astronomy I know) and I’m wondering which would work best? I realise the Watec would give more of a ‘live’ feeling to viewing (with the CCD I guess I would look at the image with zero/minimal processing). What I’m particularly interested in is the difference between a Watec and a CCD like an Atik in terms of image quality and image brightness. I assume that the Atik wo
  24. I'm torn on the CCD. Initially I was thinking about a video camera (Watec) but I'm now thinking I'd like to get into imaging as well so maybe an Atik (314L+) or equivalent (your QHY IMG2Pro certainly produces some lovely images!). The mount will be a NEQ6, but I'm still not decided on the scope. Probably a Skywatcher Evostar 80ED for imaging, but I'm guessing this won't have the aperture for using the CCD for visual work (without long exposures). I had wondered about a 200 mm f5 Newtonian for the latter, but maybe a 190 Mak-Newt would do both jobs. So many possibilities! At the moment I'm jus
  25. Thanks. I'm particularly interested because I've been thinking about using a CCD to assist visual observing, but I have no experience of imaging so I'm interested to know how long exposures need to be before you can see much on screen. Sorry if this isn't an easy question to answer, but if you were using your Mak-Newt to image a fairly bright galaxy (e.g. M51) would a 2 min exposure show much more than the ep view? Just to clarify - I'm not talking about producing a decent image, just something that shows more than the ep view
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.