Jump to content

sgl_imaging_challenge_2021_annual.thumb.jpg.3fc34f695a81b16210333189a3162ac7.jpg

phzahn

New Members
  • Posts

    3
  • Joined

  • Last visited

Reputation

10 Good
  1. Well its been a while since I last reported progress with this lens. What we have found out is that the lens will take some breathtaking wide field pictures. On page 6 of the cloudy nights thread is a very nice example. Using the lens visually is also possible, but requires inventiveness and a lot of experimentation. In my opinion, using only a few of the lenses and trying to make a scope from them is not going to work. You have to have the entire assembly including the beamsplitter, and all the lenses in it. if you like a challenge, this is a good one, and at a bargain basement price, for the possibilities. That beautiful picture is a single 5 minute exposure so its a really fast lens. F1.2 or faster depending on magnification? Maybe so.
  2. Thank you for the welcome rawhead. I do not have any pictures yet, but I will take some and see if I cant get them up here for everyone to see. I've done a little more work with this unit over the weekend. It is too early to tell if I can make a useable scope from this assembly, but I will most certainly be able to make an effective widefield camera lens from it for use in tandem with a scope. The assembly does have quite a lot of zoom to it already. My current dilema is figuring how to make it work with a focuser for visual work. I will have to acquire a few cheap lenses and play a bit with them to see what is possible, and what magnification range I will wind up with. I am not at all sure what sort of magnification range I will have for visual work once it is all said and done with. Right now I dont think there is enough room to put a focuser at the back. In any event , it will make a camera lens I would have no hope of ever being able to afford otherwise.
  3. Hello everyone, this looks like a very nice place to spend some "down time". I have information concerning this particular lens. The lens by itself is fairly useless, as most of you have guessed. However, the surplus shed also sells the complete lens assembly this objective comes from. The complete assembly sells for 575.00 dollars, and is probably one of the biggest bargains I have ever seen. The complete assembly has many more lenses, and it is a zoom assembly. At the back of the main housing there is a precision beam splitter. At the back of the beam splitter is a shutter box with a very nice shutter. Psychobilly is right about the money is no object statement. I purchased mine and recieved it only a week ago. The build quality of this unit is amazing. It is a very heavy assembly weighing 16 3/4 lbs. As for the optics, there is the 3 element main objective. Then there is another lens cell behind the objective which contains one 90mm -78mm focal length concave lens and another lens which is 60 mm in diameter. This lens cell moves back and forth for the zoom. Behind the 60 mm lens is another one in its own cell of approximately 45mm diameter (concave) and it also moves back and forth with the 90 mm one, but at a constantly varying rate to the 90mm. Then at the end of the housing is yet another lens of 28mm diameter which is in a fixed position. This is a convex lens. After this the beamsplitter is attached, and there is a 16 mm concave lens at 90 degrees to the centerline axis. At the back of the beamsplitter is another one of the 16mm lenses going into the shutter box. All of the lenses are coated. I have only taken off the shutter box and beamsplitter for now, as well as the last fixed lens before the beamsplitter. I am very reluctant to go any further than this. As far as focal length goes I do not have a lot to contribute other than to say if that last fixed lens is made to move with the lens preceeding it, spaced about 3 inches from that lens interesting things begin to happen. For those whos interest I may have peaked I would like to infrom you of a discussion thread at Cloudy Nights Telescope Reviews. I do not wish to offend the owners of this site by putting a link to another site on their board. Do a google search using this " 6 inch triplet-F1.25? ", and it should be the first result. Again, if this offends the site owners I sincerely apologise, but the information is pertinent and not available elsewhere. Looking thru the lens reveals a very nice image. I know this means nothing, but from what I can make of this, it should make an incredible astrograph or widefield scope, and have a useful magnification range from 22x to perhaps 100x or a bit less. This does not take into account the built in zoom feature, which seems to have quitre a bit of zoom. I am now trying to get a better handle on the focal length range and how to proceed with the build. It will certaianly be a very fun project an dhopefully a fruitful one. I admit to being a novice when it comes to optics, I am only a mechanical/electrical engineer by education, but I do own a machine shop and can at least make anything that I can design so I will not lose any money on this save for the cost of the assembly. You cant take it with you when you die, so you might as well spend it on something, and I have all the fly fishing rods one man can ever use. If I dont get banned from here I will post from time to time my progress with this little project. Best Regards to you all, Peter Zahn p.s. please excuse any typos as I am not a very good typist. Oh by the way, we have thought that this camera was used in a military airplane. The beamsplitter probably had a video camera attached and the monitor was in the pilots view so he could see what the camera was looking at. This is just a VERY big VERY wild guess. LOL
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.