Mikkel Kroman

It comes with a flattener. It says that it is to be used when using a full frame camera.

Hi all Will I need to use the field flattener if I use my 1600MM Pro? It does not have a full frame sensor so I would think no. Kind regards Mikkel

I am not using a reducer

Thank you. That was very helpful! I will try and upload an unprocessed sub.

Anyone?

Hi all On Takahashi's website it says that the metal back distance is 178mm. Do I need to "hit" 178mm precisely? Or is it okay that it is not 178mm as long as I am able to reach focus with my ZEO EAF? My stars seem elongated so that is why I ask. I use a ZWO ASI1600MM Pro. Kind regards Mikkel

3,500 Euros. It has only been used in a lab. Not outside. I am really unsure of what to do. I has been cloudy for almost two months here so I am not able to take it out for a test.

I bought it used from a shop. It is green.

Thank you for claryfying. I wonder whether I should complain....It was advertised as an EDX4.

Hi guys I recently purchased a FSQ-106EDX4 scope. However, the camera angle adjuster looks different from the photos I find on the internet. See the attached photos. Is my FSQ-106ED an older version?

Dear all Should I use this option when stacking and before editing in PS? I use a ZWO ASI1600MM Pro. When I use images from autosave, the images do not look the same (as good) as when I look at the stacked image in DSS. Kind rgds mikkel

Hi folks I own a Skywatcher Explorer 150PDS and I am trying to find an apprpriate heat wrap for my secondary mirror. How do I know whether my secondary mirror is glued on? Kind rgds mikkel

Hi guys. Is this the correct way to connect my ZWO camera to the scope (Skywatcher Ex. 150 PDS)? Top from the left: coma corrector, M42M-M48F, T2-T2-adapter, M42M-M42F, Filter wheel, camera. At the bottom: my standard setup. Will I not need any of those parts when imagining?

Hi guys. Is this the correct way to connect my ZWO camera to the scope (Skywatcher Ex. 150 PDS)? Top from the left: coma corrector, M42M-M48F, T2-T2-adapter, M42M-M42F, Filter wheel, camera. At the bottom: my standard setup. Will I not need any of those parts when imagining?

That did the trick. Thanks! Everywhere I read it says to set it to 115200.