Paul_Sussex

A late update... Real life got in the way a bit and, along with extra clouds from FLO, just starting to get out more. On 10th June set up quickly in the garden for some lunar observation - a bit early and no visible stars to align. Almost (?) full moon and a filter made a huge difference. Finding my way around but managed to identify Tycho, Schiller, Gassendi, Gassendi A, Copernicus and Kepler. Must get a decent lunar map. On 7th July out with the local club. With a bit of help, found out I can centre the moon and then just set too lunar tracking. Worked well without doing a proper alignment. Had a nice chat with a lady and her son also getting started with a similar scope - Celestron Astro Fi 6? Similar problems to those I had, so maybe it's just getting used to the mount? And this morning, up early to view Saturn and Jupiter. Again, couldn't find any stars to align on - sky too light. Nice low power view of Saturn and rings - no cloud or ring definition. The supplied 25mm is fine, but I think I definitely need a replacement for the 10mm. Didn't bother with the Barlow, although maybe should have tried it with the 25mm? Found Jupiter but very blurry - unfortunately, where I was set up Jupiter was right over the conservatory, so plenty of hot air! 🙄 I'll know better in future. So...things are looking up. Just need more practise! Watch this space...

Hurrah! The handset went back to FLO, who checked and replaced it. Just done a quick test indoors (lying about the time to pretend it's night) and everything seems to be working properly. Next few nights are looking a bit 'orrible, but may be able to get out later in the week to try out properly...fingers crossed!

Don't know if it's any help, but on this page - https://www.meadeuk.com/Meade-StarNavigator-NG-102-Refractor.html - under Support there are guides and manuals for your telescope.

I've recently bought the same set-up new from FLO. I found following the manual worked, but you have to be careful with north alignment - true north, not magnetic - and levelling - best with a separate level rather than the on mount bubble level. Also, as mentioned US date format and either GMT/UTC or confirm daylight saving time. Found that two star alignment would get me in the general location, usually in or close to the finder scope view.

Well, the factory reset worked for a while. Then the handset froze again. Tried to do a firmware update but couldn't even get started. Handset refused any input. Emailed FLO, so hoping to hear something back on Monday. 😞

So, after advice from FLO I checked the handset and battery leads/sockets were clean and properly fitted, made sure the powerpack was fully charged and then did a reset to factory settings. A quick indoor test seemed to operate okay. I will try out properly on the next clear night...possibly Thursday? If no joy, can then try a firmware update. Many thanks to Alex at FLO for his help.

The BST Starguiders seem to be popular - pity they don't do a 30mm/32mm as well.

I've just had a couple of nights out with my new Skymax 127 SynScan AZ GOTO and Celestron Lithium LT powertank. Initialising and alignment go okay and the mount slews and tracks but at some point the handset seems to freeze and won't accept any key inputs. The only way to clear it seems to be powering down and starting from scratch - a little frustrating and annoying. Has anyone else had this problem? I'm hoping it might just be a firmware issue. Queried with FLO, so waiting to see if they have any ideas as well.

So, just been out on the South Downs - a nice clear night. Managed a good 2-star alignment and started tracking the moon. Good views along the terminator, even with the 10mm EP and Barlow (which was pushing it a bit). I will have to get some decent EP's eventually, as I want to try out some lunar sketching. Still having problems with the SynScan. Every now and then the handset seems to freeze and won't accept any input from the buttons. I'll have to contact FLO and see if there's a fix. I'm hoping it's just a firmware issue and can be sorted with a download. Has anyone else had this issue? It's a little frustrating.

Did a lot of trawling through threads, including yours. A lot of accumulated wisdom on here. And yes, the immediate upgrades - Used the AA battery pack for a quick peek but now have the same Celestron lithium battery. Lowered the tripod indoors - seemed much steadier. Need to find a suitable seat for observing. And have a couple of clothes pegs standing by for minor fettling.

I'm slowly finding my way round the mount. Although one problem - certain items in the menu seem to freeze up and I have to power off to continue. Must check if this is a known issue. Also, don't think I could download to my phone - Hope you have as much fun with the Celestron! 😉 Be interested to hear how you get on with it.

Yes...I had a lot of help and input from @Tiny Clanger. And another bookmarked site!

Yes, I'd need to caliper the i.d. to make sure there's enough room. Too loose would be better if anything...I could pack out with some rubber.

Have some pegs to play around with. And yes, have a dew shield from Astrozap already! I'm surprised Skywatcher or an aftermarket company don't produce a rigid dew shield for the Maks. I'm tempted to see what I can do with this - https://www.screwfix.com/p/manrose-150mm-round-ducting-0-35m/686GY?tc=JT1&ds_kid=92700055281954508&ds_rl=1249404&gclid=EAIaIQobChMIja2L_drB9wIVbhoGAB1m1Q4DEAQYAyABEgIVwPD_BwE&gclsrc=aw.ds - and some black felt.

Thanks for all the advice. Any changes will be down the line, apart from a clothes peg and a comfy chair! But I have a little list...😀

Got out a bit later last night and went through the initialising and 2-star alignment. Started with Pollux, then sent the mount to Arcturus - easily visible to me but JUST behind the guttering for the 'scope. So I fudged it a bit and selected the moon as a target. Went straight there, not dead centre but visible in the 25mm eyepiece. Selected a couple of Messiers to view, but they were both below the horizon - must get a list showing locations for the future. So, lessons learned - Spend more time picking a viewing point. A bit difficult in a small garden, hopefully better when I can get out and about. And more time on alignment. Try using the tripod not extended and with a chair/stool. May be getting a Telrad from someone in my local club, but think I will still need a 90 degree RACI. Some weight in the accessory tray to reduce vibration. Clothes peg or Lego wheel focuser trick. Eventually (when I have more of an idea what I need) eyepieces and possibly a better diagonal. One issue that I had with the SynScan - didn't always want to respond to key inputs. I've done a search but haven't found anything quite like this. I was running off a pack of AA batteries, which I know is not ideal (Have a lithium battery arriving later today) Could this be the problem? Or something as simple as not pushing the keys hard enough? The firmware seems fairly current, V4.something - I'll check later. Another thing I need to sort out for the future - I've seen suggestions to replace the existing visual back and diagonal with ones using brass compression rings to better secure and protect eyepieces, but to check whether the back is a 45mm or 50mm. Is this a simple as removing the back and measuring the diameter of the hole?

And the story continues at -

So, having jumped on the "what telescope" merry-go-round I went through most possible combinations - - before finally doing what most people suggested and getting a 6" Dob, in my case the FLO Ursa Major - - but sadly didn't get on with that. Not an issue with the 'scope, just my aging frame. Allied to that, I was having some trouble finding my way around the night sky, So lots of frustration. Back to square one. After plenty of angst and many emails back and forth between myself and Chris at FLO (on holiday from Youtubing?) I settled on the SkyMax127 SynScan AZ Goto. A 127mm - well, 119mm apparent - Maksutov on a steel tripod and Alt/Az goto mount with none of yer new-fangled wifi. (Yes, I'm an old Luddite) SynScan handset, an AA battery pack, 25mm and 10mm eyepieces and a x2 Barlow. Nice and simple? Well, still working my way through the instruction manual. But with a clear sky and a crescent moon visible, I gave up on the "complicated" stuff and just shot for the moon guiding manually. And wow! Fantastic views with the usual for Skywatcher Super 25mm. Seemed nice and crisp with little noticeable chromatic aberration, although that might have been down to excitement on my part. Even better with the Barlow, but the 10mm was a little tricky - first on the upgrade list? Manual alt/az control seemed nice and smooth, and I hadn't realised the mount was set on Rate 9 (fastest) so slow motion control can only improve with practise. Still a few things to try/sort out - need to get used to the SynScan and try dropping...I mean lowering...the tripod and observing from a seat - but I think I'm hooked. Clear skies forecast for later, so may be out seeing if I can get a decent 2-star alignment. In the meantime, watch this space!

Not MORE clouds! 😆 Have a lithium battery arriving tomorrow and looks like there may be some clear skies at some point. Can't wait to get up and out. There are plenty of tips on upgrades here, but the general opinion seems to be that the bits with the Skymax are enough to get started. Although I'm already drooling over eyepieces...compression ring adaptors...Telrads...too much shiney stuff...!

Thanks for the tip - must give that a try!

I'll probably link to (yet another) new thread once I'm up and running. And I can't praise FLO enough - putting up with all my emails, replying with good advice and sorting out my return and replacement without any problems. I'll have to do a write up in the Suppliers Review section, but I have to say the service was outstanding. I'd have no qualms about recommending them to anyone.

Much easier to set up and shift around. And I think viewing will be better, although I'll still need a stool of some sort. And the other (better?) half is a lot happier that I won't do myself an injury. 🙄 No power as yet, so I won't be setting up properly until after the Bank Holiday. (Unless the powertank I have a lead on turns up) But the weather's looking typical for holidays and new toys!

Another new (replacement) toy arrived from FLO! A SkyMax 127 SynScan -

Cool - I'll drop a link in here for anyone interested. As a beginner, there'll probably be a lot of "unboxed...pointed here...saw that" but hopefully I can share a few WOW moments! PS - Free? I thought you charged by the line! 😉

Wow...I don't think I've EVER been dealt with by any other company this efficiently or courteously! One telescope returned (arrived at FLO yesterday), another ordered yesterday and now due for delivery... ...plus a huge amount of helpful email advice! The weather's looking fairly horrible for the next few nights here (of course - I'm on holiday and will have a new 'scope 😠), but at least I'll have time to get used to the SynScan. And work out how soon I can afford a Powertank! I'd like to update on progress; should I continue with this thread (and change the name AGAIN?) or start a new one - and if so in which forum?