Jump to content

Banner.jpg.b89429c566825f6ab32bcafbada449c9.jpg

Blog 13224

A blog by George in General

  • entry
    1
  • comments
    2
  • views
    1,162

About this blog

Entries in this blog

Coverting a EQ6 to belt drive

This modification was pre-discussed here http://stargazerslounge.com/discussions-mounts/139411-eq6-belt-mod.html ****Please note**** This modification is for NEQ6/EQ6 mounts running EQmod ONLY, the Synscan/Syntrek handsets only support Skywatchers/Syntas proprietary 3.92:1 gear ratio. You will need access to a lathe to re-bore the gears to fit the worm and stepper motor shaft. 48 tooth gear needs re-boring to 12mm 12 tooth gear needs re-boring to 5mm 48 tooth gear needs 3mm taking off the
George

George

2
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.