Jump to content

Narrowband

EQmod change log?


teleskopjo

Recommended Posts

The main changes added since V1.24g are custom trackig from ephemeris data and AutoPEC. Here is the complete list of changes:

EQASCOM V1.28c
    Fix to spiral slew numpad assignment and key release

EQASCOM V1.28b
    Addition of option for old V1.24g declination based pieriside reporting (Not ASCOM compliant).

EQASCOM V1.28a
    Slew pad key assignments chaneble via ini file

EQASCOM V1.27q
    ASCOM proprietary Commandstring FLIP_GOTO - bug fix.

EQASCOM V1.27p
    Pierside (pointing) reporting swapped.

EQASCOM V1.27o
    Air mass display added (click on LST to toggle display mode)

EQASCOM V1.27n
    Dec Backlash slider increased to max of 2000ms

EQASCOM V1.27m
    Extra valiadaion on site elevation entry.
    New commandstring support for Reading/Setting flipped goto.

EQASCOM V1.27l
    New CommandString support for alignment automation/scripting - :ALIGN_MODE#, :ALIGN_CLEAR_SYNC#, :ALIGN_CLEAR_POINTS#, :ALIGN_SYNC_LIMIT#


EQASCOM V1.27k
    Fix to manual goto calculation for negative declinations
    Change to mouse wheel rate change - speeds < 32 increment slowly/decrement

EQASCOM V1.27j
    ASCOM setup - option to select pierside method (Pointing, Physical or None)
    Fix to AutoPEC workig directory - changes weren't held.

EQASCOM_V1.27i
    Additional "External" option on ST-4 guiding rates - if selected then the guide rate is set externally (i.e. via synscan) and will not initialisied by EQASCOM.
    Toolbox now includes low level comms transaction time test - useful for comparing the perfomance of different mount interfaces.

EQASCOM_V1.27h
    Fix to Mosaic exe assignment - file filter wasn't set correctly and so eqmosiac disn't appear listed.


EQASCOM_V1.27g
    Custom Tracking: Data set is filtered to only load the next 24 hours of data from the file
    if, once tracking no current data is found the next 24 hours is loaded automatically.
    Fix to ASCOM 'pointing' PierSide reporting - not that the EQASCOM UI displays physical pierside which is different.

EQASCOM_V1.27f
    Custom tracking: support for JPL Horizons fractional seconds

EQASCOM_V1.27e
    Custom tracking parsing of JPL Horizons data
    Custom tracking automatic waypoint correction gotos added.

EQASCOM_V1.27d
    Custom Tracking file can now disable precession on gotos
    Custom track gotos now calculated for "mid record" positions - previously gotos were to the nearest tracking record.
    Bug fix the prevented custom track tooltip form being assigned at startup.

EQASCOM_V1.27c
    Ephemeris based custom tracking promoted to standard feature (as opposed to advanced)
    Goto implementeded for custom track objects (right click on tracking button)
    Indication given id Ephemeris data is out of date.
    Message center output provided for ephemeric format/load errors.
    
EQASCOM_V1.27b
    Fix to southern hemisphere file based tracking. (RA direction was reversed)

EQASCOM_V1.27a
    Change so encoders are immediately preset when stating in a parked state - thereby reporting the parked position
    Dual speed joystick slewing option
    Fix to custom tracking file format parsing.

EQASCOM_V1.26g
    Second instance of EQASCOM now optionally installed
    VBScripts for second instance nodified
    Toolbox changes to support second instance
    EQASCOM_Run modified for 2nd instance support
    File driven Custom Tracking added.

EQASCOM_V126f
    gamepad polling kept alive to recover "failed" gamepads without need of refresh button

EQASCOM_V126e
    File load/save dialog now shows hidden folders.
    PEC fix - the "debug" AutoAdjust was active by default.

EQASCOM_V126d
    PEC interface re-worked with new setup screen for PEC playback and Capture
    Screen position bug fix (where right hand screen is primary screen)
    Language handling for new PEC interface.

EQASCOM_V126c
    AutoPEC
       PEC gain set to 1 and PEC Phase shift set to 0 on AutoPec capture completion
       PECapture_EQMOD.txt file now logs the raw PE not the smoothed.
       PEC.txt and PECapture_EQMOD.txt now written to program files/EQMOD_PEC directory for easy user access

EQASCOM_V126b
    PEC Capture low pass and magnitude filter limits read from ini file
    PEC capture data invert option added to ini file.

EQASCOM_V126a
    Fix to range checking of dec backlash - values over 100 were reset to zero on startup.
    PEC capture routing added - investigation in progress.
    ASCOM EQuatorialCoordinate property can now be set via setup screen to “force” clients to use a particular epoch (but not all clients may play ball!)

EQASCOM_V125d
    Fixed Rate gotos now retry if initial goto doesn't get to within 0.75 degrees.
    Fixes to simulator - didn't clear encoder increments on slew to target completion if previously set to track.
    Fix to PEC sync normalisation.

EQASCOM_V125c
    Support added for GPS NMEA ZDA message (time & date).

EQASCOM_V125b
    Last GPS baud rate in the dropdown now comes from ini file so user can override to their own custom rates.
    Fix to park timer which would unpark the mount if while active it detected the mount was currently parked.

EQASCOM_V125a
    Guiding type now set via setup screen.
    Main interface only displays guiding params for the guiding type being used.
    Guide rates can now be written via ASCOM for both ST-4 and Pulseguiding.
 

Chris.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.