Jump to content

SkySurveyBanner.jpg.21855908fce40597655603b6c9af720d.jpg

Maxim DL calibration question


Recommended Posts

The nice thing about Maxim is that you don't have to worry about the order of processing. The process is as follows:

  1. Run the Set Calibration wizard
  2. Open a single light frame and run a colour conversion on it to set the debayer type. Close this image without saving
  3. Open the Stack dialog
    1. Ensure that Auto calibrate and Auto colour convert are ticked
    2. Add your light frames
    3. On the quality tab set any criteria you desire and Measure All
    4. Review the results of the Measure to check that you agree. Add or remove frames as required
    5. Set the alignment method to Auto Star Matching
    6. On the combine tab set the method and bit depth
    7. Click Go
  4. That's it.

Hope this helps

Andrew

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. By using this site, you agree to our Terms of Use.